Bug#261283: install report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: beta4, 2004-07-24, from cdimage.d.o
uname -a:
Date: 2004-07-24
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
ISO-image attached as virtual CD-ROM to a newly setup virtual machine
in VMware ESX. Network packages via ftp.de.debian.org.
Chose expert26 from boot screen.
Machine: IBM x445 running VMware ESX 2.1
Processor: Xeon MP 3GHz
Memory: 512MB dedicated to virtual machine
Root Device: virtual BusLogic SCSI HBA with VMware virtual disk on
FC storage
Root Size/partition table:
Disk /dev/sda: 512 cylinders, 64 heads, 32 sectors/track
Units = cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 18 19- 19440 83 Linux
/dev/sda2 19 511 493 504832 83 Linux
Output of lspci and lspci -n:
gfs-test0:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 08)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 08)
0000:00:0f.0 VGA compatible controller: VMWare Inc [VMWare SVGA II] PCI Display Adapter
0000:00:10.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] (rev 01)
0000:00:11.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] (rev 01)
0000:00:12.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
gfs-test0:~# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 01)
0000:00:01.0 0604: 8086:7191 (rev 01)
0000:00:07.0 0601: 8086:7110 (rev 08)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 08)
0000:00:0f.0 0300: 15ad:0405
0000:00:10.0 0100: 104b:1040 (rev 01)
0000:00:11.0 0100: 104b:1040 (rev 01)
0000:00:12.0 0200: 1022:2000 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Everything went wonderfully well. Thanks for d-i, it's great work.
Reply to: