Bug#260539: installation-reports - success!
Package: installation-reports
Debian-installer-version: i386 20040716
uname -a : Linux cicada 2.6.6-1-686-smp #1 SMP Wed May 12 16:41:10 EST
2004 i686 GNU/Linux
Date: 7/17 - night time. :)
Method: boot from 113MB CD nightly installer, DSL, No Proxy.
Machine: Compaq Proliant 6400R
Processor: 2x 500mhz XEON
Memory: 1037020k
Root Device: ida/c0d0p1 (SCSI - Compaq 3200 Array Controller)
Partition Table:
72 0 35559877 ida/c0d0
72 1 96358 ida/c0d0p1
72 2 2000092 ida/c0d0p2
72 3 2000092 ida/c0d0p3
72 4 1 ida/c0d0p4
72 5 7815591 ida/c0d0p5
72 6 7815591 ida/c0d0p6
72 7 7815591 ida/c0d0p7
72 8 8016403 ida/c0d0p8
72 16 106692000 ida/c0d1
72 17 106691984 ida/c0d1p1
/dev/ida/c0d0p1 on /boot type ext3 (rw)
/dev/ida/c0d1p1 on /home type ext3 (rw)
/dev/ida/c0d0p6 on /opt type ext3 (rw)
/dev/ida/c0d0p7 on /tmp type ext3 (rw)
/dev/ida/c0d0p8 on /usr type ext3 (rw)
/dev/ida/c0d0p5 on /var type ext3 (rw)
Output of lspci:
0000:00:01.0 PCI bridge: IBM IBM27-82351 (rev 07)
0000:00:0b.0 PCI Hot-plug controller: Compaq Computer Corporation PCI
Hotplug Controller (rev 04)
0000:00:0c.0 System peripheral: Compaq Computer Corporation Advanced
System Management Controller
0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 14)
0000:00:0d.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875
(rev 14)
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
215IIC [Mach64 GT IIC] (rev 7a)
0000:00:0f.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:0f.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:0f.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:0f.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:10.0 Host bridge: Intel Corp. 450NX - 82451NX Memory & I/O
Controller (rev 03)
0000:00:12.0 Host bridge: Intel Corp. 450NX - 82454NX/84460GX PCI Expander
Bridge (rev 04)
0000:00:14.0 Host bridge: Intel Corp. 450NX - 82454NX/84460GX PCI Expander
Bridge (rev 04)
0000:01:00.0 Unknown mass storage controller: Compaq Computer Corporation
Smart-2/P RAID Controller (rev 04)
0000:04:02.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev
02)
0000:04:0b.0 PCI Hot-plug controller: Compaq Computer Corporation PCI
Hotplug Controller (rev 04)
0000:05:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 05)
0000:05:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 05)
Base System Installation Checklist:
Initial boot worked: [o]
Configure network HW: [o]
Config network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Create file systems: [o]
Mount partitions: [o]
Install base system: [o]
Install boot loader: [o]
Reboot: [o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Installer was much better for setting up file systems than woody. So far
nothing unusual to report. Nice work!
Reply to: