Bug#260478: Installation successful (including PCMCIA wireless NIC)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040719/
uname -a: Linux homer 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686
GNU/Linux
Date: 20th of July
Method: Install via cdrom
Machine: Self-built
Processor: p4-1.6Ghz
Memory: 512 MB
Root Device: /dev/hda (ide)
Root Size/partition table:
Filesystem Size Used Avail Use% Mounted on
/dev/hda3 8,1G 144M 7,5G 2% /
tmpfs 252M 0 252M 0% /dev/shm
/dev/hda1 9,2G 217M 8,5G 3% /usr
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev
01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev
01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev
01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI
Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4)
AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller
(rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV28
[GeForce4 Ti 4200 Go AGP 8x] (rev a1)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5705M Gigabit Ethernet (rev 01)
0000:02:01.0 CardBus bridge: Texas Instruments: Unknown device ac47 (rev
01)
0000:02:01.1 CardBus bridge: Texas Instruments: Unknown device ac4a (rev
01)
0000:02:01.2 FireWire (IEEE 1394): Texas Instruments: Unknown device
802b
0000:02:01.3 System peripheral: Texas Instruments: Unknown device 8204
0000:02:03.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B
Mini PCI Adapter (rev 04)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Noticed no problems. In particular I was happy to see that my PCMCIA
wireless NIC was found during install and I was prompted for a WEP key
which my access point requires. Everything worked nicely in general.
- --
Frederik Dannemare | mailto:frederik@dannemare.net
GnuPG key: search for 'dannemare' on http://pgpkeys.mit.edu
Key fingerprint: BB7B 078A 0DBF 7663 180A F84A 2D25 FAD5 9C4E B5A8
http://frederik.dannemare.net | http://www.linuxworlddomination.dk
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFA/XSLLSX61ZxOtagRAvfdAJ9ICfh5iOIOHLas3G1J6jxRlVF6XgCfSYgi
DQGuBMCWA1ekmxcyDypzHkU=
=NC9T
-----END PGP SIGNATURE-----
Reply to: