[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#260394: installation-reports: ppc: unicode glitch, wrong kernel, alt and command keys swapped



Package: installation-reports

INSTALL REPORT

Debian-installer-version: 
daily built CD image from Jul 18, 2004:
http://cdimage.debian.org/pub/cdimage-testing/daily/powerpc/20040718/sarge-powerpc-netinst.iso

uname -a: Linux veggie 2.6.7-powerpc #1 Sat Jul 10 03:47:45 CEST 2004 ppc GNU/Linux
Date: Jul 19, 2004
Method: 
  - boot from CD 
  - attached ethernet network
  - booted with option 'install-2.6'

Machine: Apple iBook G4; model M9164D/A
Processor:
 processor       : 0
 cpu             : 7455, altivec supported
 clock           : 798MHz
 revision        : 3.3 (pvr 8001 0303)
 bogomips        : 804.39
 machine         : PowerBook6,3
 motherboard     : PowerBook6,3 MacRISC3 Power Macintosh
 detected as     : 287 (iBook G4)
 pmac flags      : 0000000a
 L2 cache        : 256K unified
 memory          : 256MB
 pmac-generation : NewWorld

Memory: 256 MB
Root Device: IDE /dev/hda4

Root Size/partition table:
        #                    type name                 length   base     ( size )  system
/dev/hda1     Apple_partition_map Apple                    63 @ 1        ( 31.5k)  Partition map
/dev/hda2         Apple_Bootstrap Apple_Bootstrap        1954 @ 64       (977.0k)  NewWorld bootblock
/dev/hda3         Apple_UNIX_SVR2 swap                 585938 @ 2018     (286.1M)  Linux swap
/dev/hda4         Apple_UNIX_SVR2 Debian              7812501 @ 587956   (  3.7G)  Linux native
/dev/hda5               Apple_HFS Apple_HFS_Untitled_5 12582824 @ 46022280 (  6.0G)  HFS
/dev/hda6         Apple_UNIX_SVR2 home               37621823 @ 8400457  ( 17.9G)  Linux native
/dev/hda7              Apple_Free Extra                    16 @ 58605104 (  8.0k)  Free space

hda4: /, hda6: /home, hda3: swap, hda2: bootstrap (other partitions were not used)

Output of lspci and lspci -n:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV250 5c63 [Radeon Mobility 9200 M9+] (rev 01)
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:02:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:02:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
0002:02:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)

0000:00:0b.0 0600: 106b:0034
0000:00:10.0 0300: 1002:5c63 (rev 01)
0001:01:0b.0 0600: 106b:0035
0001:01:17.0 ff00: 106b:003e
0001:01:18.0 0c03: 106b:003f
0001:01:19.0 0c03: 106b:003f
0001:01:1a.0 0c03: 106b:003f
0001:01:1b.0 0c03: 1033:0035 (rev 43)
0001:01:1b.1 0c03: 1033:0035 (rev 43)
0001:01:1b.2 0c03: 1033:00e0 (rev 04)
0002:02:0b.0 0600: 106b:0036
0002:02:0d.0 ff00: 106b:003b
0002:02:0e.0 0c00: 106b:0031 (rev 81)
0002:02:0f.0 0200: 106b:0032 (rev 80)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [!] (see below)
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

- Although I did 'install-2.6' and d-i indeed used kernel 2.6.7, it
  installed a base system with kernel 2.4.25. X and power management
  does not work with 2.4. I installed 2.6.7 manually, now everything
  works.

- when configuring the base system, the first debconf template (from
  console-data) is obviously encoded in UTF-8, but shown as latin1, i.
  e. the umlauts were totally scrambled. All other templates work
  normally.

- I chose German keymap (de-latin1), but the alt and command keys are
  swapped in the text consoles (this works correctly under X).

Nevertheless, great job! Thanks for your hard work!

Martin

-- 
Martin Pitt                 Debian GNU/Linux Developer
martin@piware.de                      mpitt@debian.org
http://www.piware.de             http://www.debian.org



Reply to: