Bug#260185: install-reports: [usb] success for ThinkPad X22
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian-installer daily snapshot for USB media with netinst ISO image
* http://people.debian.org/~joeyh/d-i/images/daily/hd-media/boot.img.gz (2004-07-16)
* http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/sarge-i386-netinst.iso (2004-07-15)
uname -a: Linux cdpark 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Date: Saturday, July 17, 2004
Method: Using USB stick with netinst ISO image
Machine: IBM ThinkPad X22
Processor: Pentium III Mobile 800 MHz
Memory: 640 MB
Root Device: IDE. /dev/hda6
Root Size/partition table:
* Root: /dev/hda6 : 3 GB (ext3 filesystem)
* Swap: /dev/hda7 : 316MB
* Result of fdisk -l /dev/hda
Disk /dev/hda: 30.0 GB, 30005821440 bytes
240 heads, 63 sectors/track, 3876 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1084 8195008+ 7 HPFS/NTFS
/dev/hda2 1085 3713 19875240 f W95 Ext'd (LBA)
/dev/hda3 3714 3875 1224720 1c Hidden W95 FAT32 (LBA)
/dev/hda5 1085 3251 16382488+ b W95 FAT32
/dev/hda6 * 3252 3664 3122248+ 83 Linux
/dev/hda7 3665 3713 370408+ 82 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 41)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
0000:02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
0000:02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
0000:02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
0000:02:05.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01)
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
0000:00:00.0 Class 0600: 8086:3575 (rev 02)
0000:00:01.0 Class 0604: 8086:3576 (rev 02)
0000:00:1d.0 Class 0c03: 8086:2482 (rev 01)
0000:00:1d.1 Class 0c03: 8086:2484 (rev 01)
0000:00:1d.2 Class 0c03: 8086:2487 (rev 01)
0000:00:1e.0 Class 0604: 8086:2448 (rev 41)
0000:00:1f.0 Class 0601: 8086:248c (rev 01)
0000:00:1f.1 Class 0101: 8086:248a (rev 01)
0000:00:1f.3 Class 0c05: 8086:2483 (rev 01)
0000:00:1f.5 Class 0401: 8086:2485 (rev 01)
0000:01:00.0 Class 0300: 1002:4c59
0000:02:03.0 Class 0607: 1180:0476 (rev a8)
0000:02:03.1 Class 0607: 1180:0476 (rev a8)
0000:02:03.2 Class 0c00: 1180:0552
0000:02:05.0 Class 0780: 11c1:0449 (rev 01)
0000:02:08.0 Class 0200: 8086:1031 (rev 41)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I can install without any problems. Good job!
FYI: When I install using USB stick with hd-media in TC1 image,
it failed in the "Detecd CD" step.
This problem is resolved in the daily snapshot.
Reply to: