Package: installation-reports INSTALL REPORT Debian-installer-version: bootfloppies from 01-07-2004 uname -a: Linux ankh 2.4.26-1-k7 #1 Sat May 1 21:40:09 EST 2004 i686 GNU/Linux Date: 2. Jul 2004 Method: I've installed it from bootfloppies (using only boot and root image). Network install from ftp.icm.edu.pl. Network configured via DHCP (worked fine), i'm not using proxy. Machine: self-assembled Processor: AMD Duron 600 Memory: generic SDRAM 320MB Root Device: IDE - IBM Deskstar 40GB Root Size/partition table: Disk /dev/hda: 41.1 GB, 41174138880 bytes 255 heads, 63 sectors/track, 5005 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 1275 10241406 7 HPFS/NTFS /dev/hda2 1276 5005 29961225 f W95 Ext'd (LBA) /dev/hda5 1276 4049 22282123+ 7 HPFS/NTFS /dev/hda6 4050 4058 72261 83 Linux /dev/hda7 4059 4083 200781 82 Linux swap /dev/hda8 4084 5005 7405933+ 83 Linux /dev/hda6 - /boot /dev/hda8 - / Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev02) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20) 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0a.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] 0000:00:00.0 Class 0600: 1106:0305 (rev 02) 0000:00:01.0 Class 0604: 1106:8305 0000:00:07.0 Class 0601: 1106:0686 (rev 22) 0000:00:07.1 Class 0101: 1106:0571 (rev 10) 0000:00:07.2 Class 0c03: 1106:3038 (rev 10) 0000:00:07.3 Class 0c03: 1106:3038 (rev 10) 0000:00:07.4 Class 0c05: 1106:3057 (rev 30) 0000:00:07.5 Class 0401: 1106:3058 (rev 20) 0000:00:09.0 Class 0200: 10ec:8139 (rev 10) 0000:00:0a.0 Class 0300: 102b:051b Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [o] Configure network HW: [o] Config network: [o] Detect CD: [o] Load installer modules: [o] Detect hard drives: [o] Partition hard drives: [o] Create file systems: [o] Mount partitions: [o] Install base system: [o] Install boot loader: [o] Reboot: [o] Comments/Problems: D-i worked fine for me, although: - when interrupted (ie. when I choose to cancel, while creating new user, or press CTRL^C while downloading packages), d-i falls back to the expert mode - in "select and install packages", when I choose not to install anything, or "manually select packages" and then in aptitude select nothing too, d-i wants to install a lot of packages (xfree for example). IMHO it shouldn't do that, when noting is choosen. -- Maciej Wachowiec <dwakwiaty@wp.pl> JID: dwakwiaty@jabberpl.org GPG: 1024D/9EBA51D8 724E BD88 EEB1 4B9E C868 CE17 5563 6A03 9EBA 51D8
Attachment:
signature.asc
Description: Digital signature