Bug#255237: kernel 2.6 doesn't recognize the SCSI controller or cdrom
Package: installation-reports
Version: sid_d-i, 20040616
The CDROM is perfecly detected when d-i uses 2.4 kernel, but it isn't
detected when using linux 2.6. The procedure stops and ask for loading
modules from a floppy. The CDROM is connected to the SCSI controller.
This is the lspci output from linux 2.4:
0000:00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge
0000:00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge
0000:00:02.0 System peripheral: Siemens Nixdorf AG FSC Multiprocessor
Interrupt Controller (rev 02)
0000:00:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152
(rev 03)
0000:00:04.0 Class ff00: Siemens Nixdorf AG FSC Copernicus Management
Controller (rev 01)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:02:00.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45)
0000:02:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895
(rev 01)
0000:02:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
0000:02:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
0000:00:00.0 Class 0600: 8086:71a0
0000:00:01.0 Class 0604: 8086:71a1
0000:00:02.0 Class 0880: 110a:0015 (rev 02)
0000:00:03.0 Class 0604: 1011:0024 (rev 03)
0000:00:04.0 Class ff00: 110a:001d (rev 01)
0000:00:07.0 Class 0601: 8086:7110 (rev 02)
0000:00:07.1 Class 0101: 8086:7111 (rev 01)
0000:00:07.2 Class 0c03: 8086:7112 (rev 01)
0000:00:07.3 Class 0680: 8086:7113 (rev 02)
0000:02:00.0 Class 0300: 1013:00b8 (rev 45)
0000:02:01.0 Class 0100: 1000:000c (rev 01)
0000:02:09.0 Class 0200: 8086:1229 (rev 08)
0000:02:0a.0 Class 0200: 8086:1229 (rev 08)
Bye,
Giuseppe
Reply to: