Bug#254634: Package: installation-reports
Package: installation-reports
Debian-installer-version: sarge beta4
uname -a: Linux pluto 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i486 GNU/Linux
Date: 14 Jun 2004 20:00
Method: floppy boot (boot.img, root.img, cd-drivers.img, net-drivers.img)
then network install from ftp.us.debian.org
Machine: Toshiba T2130CT Laptop
Processor: 486
Memory: 32M
Root Device: ide, /dev/hda
Root Size/partition table: /boot is 32M, swap is 80M, / is 930M.
Output of lspci:
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.
Base System Installation Checklist:
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [ ]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [0]
Install boot loader: [0]
Reboot: [0]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
After initial install and reboot the system gives errors when setting
up the PCMCIA network stuff:
/lib/modules/2.4.26-1-386/kernel/drivers/pcmcia/yenta_socket.o: init_module: No such device
/lib/modules/2.4.26-1-386/kernel/drivers/pcmcia/yenta_socket.o: insmod /lib/modules/2.4.26-1-386/kernel/drivers/pcmcia/yenta_socket.o failed
/lib/modules/2.4.26-1-386/kernel/drivers/pcmcia/yenta_socket.o: insmod yenta_socket failed
This seems a bit odd since the PCMCIA and networking worked fine for
the initial install.
NIC is PCMCIA 3COM 3c589.
Scott
--
: Scott Coburn
: scotttt@optonline.net
: This message is brought to you by Linux
: "Assume a spherical cow of uniform density..."
Reply to: