Bug#251348: installation-reports on Dell Inspiron 8200
Package: installation-reports
Version: snapshot 20040527, sarge-i386-netinst.iso
uname -a: Linux debiandell 2.6.5-1-386 #2 Fri Apr 30 20:13:30 EST 2004
i686 GNU/Linux
Date: 27-may-2004
Method: Network install, from kulnet.be mirror
Machine: DELL Inspiron 8200
Processor: P IV - 1.8 Ghz
Memory: 512 Mb
Root Device: IDE 60 Gb
Root Size/partition table:
/dev/hda4 is used, the others are ntfs partitions.
/dev/hda4 is 15 Gb.
swap is 256Mb.
debiandell:~# mount
/dev/hda4 on / type reiserfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP
Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev
02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev
02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97
Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev
02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17
[GeForce4 440 Go] (rev a3)
0000:02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)
0000:02:01.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:01.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:01.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394
Controller
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
All went very well (no special things used, no ATA, no Software Raid),
only some problems getting the NVIDIA driver to work in X. This has been
resolved after using the guidelines (and the packages) as on
http://people.debian.org/~rdonald/index.php.
Reply to: