Bug#244195: 244195
> * Paul Verwayen <paul@kronk.cistron.nl> [2004-05-26 23:38]:
> > There's still no detection of the Promise 20378 SATA.
> > Not with the 2.4.26, and not with the 2.6 kernel.
> >
> > So, what's missing, is the loading of the sata_promise
> > module.
>
> Thanks for checking. Can you please send me the output of the
> following two commands (either from Fedora or your new Debian
> intallation):
> lspci
> lspci -n
The following output is from the new Debian installation:
amd64:~# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
0000:00:08.0 Multimedia audio controller: IC Ensemble Inc ICE1712 [Envy24] (rev 02)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0000:00:0d.0 RAID bus controller: Promise Technology, Inc. PDC20378 (SATA150 TX) (rev 02)
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT]
0000:01:00.1 Display controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] (Secondary)
amd64:~# lspci -n
0000:00:00.0 Class 0600: 1106:3188 (rev 01)
0000:00:01.0 Class 0604: 1106:b188
0000:00:07.0 Class 0100: 9004:8178 (rev 01)
0000:00:08.0 Class 0401: 1412:1712 (rev 02)
0000:00:0b.0 Class 0200: 10ec:8169 (rev 10)
0000:00:0d.0 Class 0104: 105a:3373 (rev 02)
0000:00:0f.0 Class 0101: 1106:0571 (rev 06)
0000:00:10.0 Class 0c03: 1106:3038 (rev 81)
0000:00:10.1 Class 0c03: 1106:3038 (rev 81)
0000:00:10.2 Class 0c03: 1106:3038 (rev 81)
0000:00:10.3 Class 0c03: 1106:3038 (rev 81)
0000:00:10.4 Class 0c03: 1106:3104 (rev 86)
0000:00:11.0 Class 0601: 1106:3227
0000:00:18.0 Class 0600: 1022:1100
0000:00:18.1 Class 0600: 1022:1101
0000:00:18.2 Class 0600: 1022:1102
0000:00:18.3 Class 0600: 1022:1103
0000:01:00.0 Class 0300: 1002:4e4a
0000:01:00.1 Class 0380: 1002:4e6a
> Ideally, can you also boot into debian-installer again, and check
> which (SATA related) modules have been loaded; just look at
> /proc/modules are sd_mod and sata (or libata or so) there?
I booted into the Debian-installer again. I could not find
the SATA related modules you specified.
Are the following modules SATA related?:
pdc202xx_new
pdc202xx_old
Gr.
Paul Verwayen
Reply to: