Bug#250674: Installation report: i386 sid on second harddisk
Package: installation-reports
INSTALL REPORT
Debian-installer-version: sarge-i386-businesscard.iso 22-May-2004 14:40 50.0M
from http://gluck.debian.org/cdimage/testing/sid_d-i/i386/current/ ,
downloaded 23-MAY-2004 18:30
uname -a: Linux alfred 2.6.6-1-k7 #1 Wed May 12 18:19:40 EST 2004 i686 GNU/Linux
Date: 23-MAY-2004 22:00
Method: boot from CD, select 'unstable', packages from
ftp.de.debian.org with local proxy
Machine: made from components
Processor: Athlon 1800+
Memory: 512 MByte
Root Device: /dev/hdc8 (xfs), /boot on /dev/hdc7 (ext3)
Root Size/partition table:
Disk /dev/hda: 20.5 GB, 20576747520 bytes
255 heads, 63 sectors/track, 2501 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1494 2501 8096760 f W95 Ext'd (LBA)
/dev/hda2 * 856 1493 5124735 83 Linux
/dev/hda3 91 855 6144862+ c W95 FAT32 (LBA)
/dev/hda4 1 90 722893+ 7 HPFS/NTFS
/dev/hda5 1494 1621 1028128+ 6 FAT16
/dev/hda6 1622 1682 489951 83 Linux
/dev/hda7 1683 1706 192748+ 82 Linux swap
/dev/hda8 1707 1742 289138+ 83 Linux
/dev/hda9 1743 2501 6096636 b W95 FAT32
Partition table entries are not in disk order
Disk /dev/hdc: 10.2 GB, 10260710400 bytes
255 heads, 63 sectors/track, 1247 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 510 4096543+ b W95 FAT32
/dev/hdc2 511 1152 5156865 5 Extended
/dev/hdc5 511 767 2064321 b W95 FAT32
/dev/hdc6 1145 1152 64228+ 82 Linux swap
/dev/hdc7 * 768 803 289138+ 83 Linux /boot
/dev/hdc8 804 1144 2739051 83 Linux /
Partition table entries are not in disk order
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
0000:00:09.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10)
0000:00:0b.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11)
0000:00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 04)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82)
0000:02:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
0000:02:09.0 USB Controller: NEC Corporation USB (rev 41)
0000:02:09.1 USB Controller: NEC Corporation USB (rev 41)
0000:02:09.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
0000:00:00.0 Class 0600: 1106:3099
0000:00:01.0 Class 0604: 1106:b099
0000:00:09.0 Class 0100: 1022:2020 (rev 10)
0000:00:0b.0 Class 0604: 3388:0021 (rev 11)
0000:00:0d.0 Class 0200: 8086:1229 (rev 04)
0000:00:11.0 Class 0601: 1106:3074
0000:00:11.1 Class 0101: 1106:0571 (rev 06)
0000:00:11.2 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.3 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.4 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.5 Class 0401: 1106:3059 (rev 30)
0000:01:00.0 Class 0300: 102b:0525 (rev 82)
0000:02:08.0 Class 0c00: 1106:3044 (rev 46)
0000:02:09.0 Class 0c03: 1033:0035 (rev 41)
0000:02:09.1 Class 0c03: 1033:0035 (rev 41)
0000:02:09.2 Class 0c03: 1033:00e0 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [1]
Comments/Problems:
The Sid installation went even smoother than the Sarge installation
the day before.
(1)OS-prober correctly recognized the linux on hda as SuSE 9.0 and
the Win98 on hda and WinXP on hdc, but misinterpreted the OS/2 on
hda as yet another Win98/ME/2000. However, I was only able to
boot Sid or SuSE, not Win or OS/2.
After reboot and tasksel, installation went through with remarkably
few questions and yielded a fully functional desktop system. Only flaw
was the slightly incorrect Grub setup for Win98 and OS/2.
>>>>>>>>>>>>>>>> GREAT! <<<<<<<<<<<<<<<<<<
Herbert
Reply to: