Package: installation-reportsDebian-installer-version: 20.05.2004 Installer beta4 (from http://http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/floppy/)
uname -a: Linux subcommentarium 2.4.25-1-386 #2 Thu May 20 15:41:09 EST 2004 i586 unknown Date: 2004-05-20 15:00 Method: Boot-Floppies, Network from ftp.uni-koeln.de Machine: Toshiba Portege 3020ct - Subnotebook (without CD-ROM) (P MMX 300 MHz - 10.4" TFT, Magnesium case, 1.32kg, 25.7 cm x 21.6 cm x 2 cm) Processor: P MMX 300 MHz Memory: 64MB Root Device: Toshiba MK6411MAT ATA DISK driveRoot Size/partition table: _________________
Disk /dev/hda: 6495 MB, 6495068160 Bytes 255 heads, 63 sectors/track, 789 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 774 789 128520 83 Linux /dev/hda2 * 1 773 6209091 83 Linux _________________ Output of lspci: _________________ pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: Toshiba America Info Systems 601 (rev a2) 0000:00:04.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph128XD] (rev 01) 0000:00:0b.0 USB Controller: NEC Corporation USB (rev 02) 0000:00:11.0 Communication controller: Toshiba American Info Systems FIR Port (rev 23) _________________ Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [E] / [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: First tried 10/100MBit PCMCIA-NIC "Fiberline FL-FE2000VX", was not detected nor properly set up after choosing the right chipset (8139too). I attached Information on how to get it working under Linux (from driver disk). Then I used a billionton 10MBit CompactFlash-sized NIC (CFLT-10B) with PCMCIA-Adapter, that one was detected without problem and set up properly. I used this to install the system over network. When I installed the system and rebooted, the networkcard did not work anymore, because the pcmcia-daemon or the hotplug daemon is down. During boot-up: ____________ Starting hotplug subsystem: input [failed] net pci ** can't synthesize pci hotplug events [failed] usb ** can't synthesize root hub events done _____________ ... _____________ Starting PCMCIA services: Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm]/lib/modules/2.4.26-1-586tsc/kernel/drivers/pcmcia/yenta_socket.o: insmod /lib/modules/2.4.26-1-586tsc/kernel/drivers/pcmcia/yenta_socket.o failed
/lib/modules/2.4.26-1-586tsc/kernel/drivers/pcmcia/yenta_socket.o: insmod yenta_socket failed _____________ A try to restart the pcmcia-daemon does not help. I would apreciate some help on how to getting to work this. Thanks for your work on the cool installer! Lutz Mischa Heitmüller Cologne Germany mailto:lmh@koeln.it
Attachment:
fe2000vx.tar.gz
Description: application/gzip