Bug#249670: Relatório de Instalação (Installation Report)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian-BR-CDD 20040518
uname -a: Linux voabaixo-debianbr 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux
Date: May 18, 2004, 15:24 hr BRT
Method: CDROM install, booting off CD. Security uptade through web
Machine: Desktop machine - Sold by Eletrax (local company)
Processor: Pentium III 733 MHz
Memory: 256MB
Root Device: IDE HD 20GB, /dev/hdb5
Root Size/partition table:
Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x83 254 63 364 63 5863662
2 0x00 0 1 365 0x05 254 63 1023 5863725 72308565
3 0x00 0 0 0 0x00 0 0 0 0 0
4 0x00 0 0 0 0x00 0 0 0 0 0
5 0x00 1 1 365 0x83 254 63 1023 63 29302497
6 0x00 254 63 1023 0x82 254 63 1023 63 497952
7 0x00 254 63 1023 0x83 254 63 1023 63 19534977
8 0x00 254 63 1023 0x83 254 63 1023 63 22972887
Partition Table for /dev/hdb
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x83 254 63 242 63 3903732
2 0x00 0 1 243 0x05 254 63 1023 3903795 35198415
3 0x00 0 0 0 0x00 0 0 0 0 0
4 0x00 0 0 0 0x00 0 0 0 0 0
5 0x00 1 1 243 0x83 254 63 728 63 7807527
6 0x00 1 1 729 0x83 254 63 1023 63 5863662
7 0x00 254 63 1023 0x83 254 63 1023 63 5863662
8 0x00 254 63 1023 0x82 254 63 1023 63 1959867
9 0x00 254 63 1023 0x83 254 63 1023 63 13703382
root mounted on /dev/hdb5, /home manually mounted on /dev/hda7 since
there was a previously installed system.
Output of lspci and lspci -n:
# lspci
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16)
0000:00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16)
0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
0000:00:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
# lspci -n
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Class 0600: 1106:0691 (rev c4)
0000:00:01.0 Class 0604: 1106:8598
0000:00:04.0 Class 0601: 1106:0686 (rev 40)
0000:00:04.1 Class 0101: 1106:0571 (rev 06)
0000:00:04.2 Class 0c03: 1106:3038 (rev 16)
0000:00:04.3 Class 0c03: 1106:3038 (rev 16)
0000:00:04.4 Class 0600: 1106:3057 (rev 40)
0000:00:05.0 Class 0401: 13f6:0111 (rev 10)
0000:00:08.0 Class 0200: 10b7:9200 (rev 74)
0000:01:00.0 Class 0300: 10de:002d (rev 15)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Hardware detection failed to correctly detect my video card; it offered
Vesa option while I've a nVidia Riva TNT64 card.
Hardware detection screens aren't informatives; it's impossible to know
if one's hardware was detected correctly. It should show in the next
screen what was found on previous one. For example, when detecting
video card or mouse it should show me what it found (if anything) and
give me the option to accept, drop ou manually edit its detection.
Even after have my mouse detected, I had to inform port and protocol.
Protocol screen is confusing; it ask for protocol but don't say the
difference between protocol and manufacturer name; it's OK for someone
used to install Linux but not to the newbie.
Scrollkeeper process should be backgrounded! It takes too long to be a
foreground process, mainly on a installation procedure.
I was asked twice for papersize. One of them I think was by papersize;
the other I don't remember by who.
fontconfig should default to anti-aliasing.
When there is some error installing packages, the screen informing that
is uninformative; it don't say you the failed package neither which
error occurred; that is, you've no information about what happened!
Maybe such error (dependencies errors) should be treated automatically,
just issuing apt-get again, till no error or other kind of error remain.
Even choosing Brazilian Portuguese, locales were not generated
correctly.
I ended up with:
$ locale
LANG=POSIX
LC_CTYPE="POSIX"
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=
is this correct? shouldn't I get PT_BR?
Comments specifics to Debian-BR-CDD. (I'm sending this also to Debian-BR
list)
Alguns erros de português nas telas de instalação (GRUB Install).
Desta vez, o Grub detectou os outros sistemas; instalei o grub no MBR.
Não daria para tirar os "Ambientes de Localização (Hebráico, Lituano,
Norueguês, Catalão, Dinamarquês, Ucraniano") da tasksel e os respectivos
pacotes (se eles estiverem no CD)?
Selecionei as seguintes tasks: Usuário Final, Servidores e
Desenvolvimento - todos os pacotes destas tasks. Foi tudo bem na
instalação.
Na tela do Xfree86 que pede a configuração do teclado, seria
interessante que os modelos dos teclados brasileiros fossem dados
como exemplo; na tela atual, ele sugere que o modelo está relacionado
ao código do país (duas letras) e isto não é verdade para quem tem
o ABNT2 (o meu caso).
Já falei acima mas vou repetir: o scrollkeeper deveria ser colocado
em segundo plano; ele é muito lento para se ficar esperando durante
a instalação!
Sugiro que se coloque o endereço das listas de discussão dup, debian-br
para que as pessoas possam tirar dúvidas e participar do aprimoramento
do CD.
O kde-i18n-ptbr e o openoffice-l10n-pt-br não foram instalados por
padrão; fiquei com o kde em inglês, bem como o openoffice.
O gnome também está em inglês; acho que porque os locales não estão
definidos corretamente.
No gnome, o konqueror ficou como navegador padrão; após clicar em HOME,
o konqueror foi executado. Eu havia executado o KDE antes do GNOME.
O menu Debian no GNOME está em PT-BR (??)
Não teria como colocarmos uma splashscreen para o KDE com o logo do
Debian, tal qual a do GNOME?
Não tentei a instalação com o kernel 2.6, mas como outro colega já
tentou e teve os mesmos problemas que eu já tive, não o farei agora.
[]s,
--
Mario O.de Menezes, Ph.D. "Many are the plans in a man's heart, but
LinuxUser: #24626 is the Lord's purpose that prevails" Pv 19.21
http://www.ipen.br/~mario
Reply to: