Package: installation-reports
INSTALL REPORT
Debian-installer-version: Beta 4, 2004-05-04 (ISO image with base packages)
uname -a: Linux ligate 2.6.5-1-686 #5 Fri Apr 30 20:26:13 EST 2004 i686 GNU/Linux
Date: 2004-05-04
Method: I booted off a CD-ROM burned from the above ISO image, using the media slice
Machine: IBM Thinkpad X23
Processor: Intel(R) Pentium(R) III Mobile CPU 866MHz
Memory: 256M
Root Device: IDE hard disk
Root Size/partition table:
Disk /dev/hda: 30.0 GB, 30005821440 bytes
15 heads, 63 sectors/track, 62016 cylinders
Units = cylinders of 945 * 512 = 483840 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 6224 2940808+ 7 HPFS/NTFS
/dev/hda2 * 6225 7257 488092+ 83 Linux /
/dev/hda3 7258 41386 16125952+ f W95 Ext'd (LBA)
/dev/hda5 7258 8317 500818+ 83 Linux swap
/dev/hda6 8318 20718 5859441 83 Linux /usr
/dev/hda7 20719 28985 3906126 83 Linux /var
/dev/hda8 28986 41386 5859441 83 Linux /home
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
0000:02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:02:05.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01)
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
0000:00:00.0 Class 0600: 8086:3575 (rev 04)
0000:00:01.0 Class 0604: 8086:3576 (rev 04)
0000:00:1d.0 Class 0c03: 8086:2482 (rev 02)
0000:00:1d.1 Class 0c03: 8086:2484 (rev 02)
0000:00:1d.2 Class 0c03: 8086:2487 (rev 02)
0000:00:1e.0 Class 0604: 8086:2448 (rev 42)
0000:00:1f.0 Class 0601: 8086:248c (rev 02)
0000:00:1f.1 Class 0101: 8086:248a (rev 02)
0000:00:1f.3 Class 0c05: 8086:2483 (rev 02)
0000:00:1f.5 Class 0401: 8086:2485 (rev 02)
0000:01:00.0 Class 0300: 1002:4c59
0000:02:03.0 Class 0607: 1180:0476 (rev 80)
0000:02:03.1 Class 0607: 1180:0476 (rev 80)
0000:02:05.0 Class 0780: 11c1:0449 (rev 01)
0000:02:08.0 Class 0200: 8086:1031 (rev 42)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] but I had to add vga=771
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O] but when I tried to install GRUB in the boot
sector of a partition rather than the master
boot record of the disk, it did not complain
beforehand or afterhand that it won't work
Reboot: [O]
Comments/Problems:
It would be nice if it were easier to reinstall GRUB on a disk
where installation has already finished. I could only reinstall
GRUB in this situation by repartitioning and reinstalling the
base packages.
I was put off by "Taiwan, Province of China", and chose the
United States instead.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Attachment:
signature.asc
Description: Digital signature