Bug#247657: Debian installer bug report
Package: installation-reports
Debian-installer-version: 5 May - http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a: Linux Persephone 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux
Date: 5 May - about 20.00
Method: Boot from cd, normal install, automagic partitioning.
Machine: Normal PC
Processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 449.241
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 894.56
Memory:
total: used: free: shared: buffers: cached:
Mem: 130437120 105586688 24850432 0 6352896 81911808
Swap: 462897152 0 462897152
MemTotal: 127380 kB
MemFree: 24268 kB
MemShared: 0 kB
Buffers: 6204 kB
Cached: 79992 kB
SwapCached: 0 kB
Active: 48604 kB
Inactive: 44296 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 127380 kB
LowFree: 24268 kB
SwapTotal: 452048 kB
SwapFree: 452048 kB
Root Device: 13 gig HD
Root Size/partition table:
/dev/hde1 3607424 499248 2924924 15% /
tmpfs 63688 0 63688 0% /dev/shm
/dev/hde5 9033008 131672 8442584 2% /home
/dev/hdg1 79546084 21477860 54027480 29% /mnt/jochem
/dev/hdg5 78020484 19751664 54305588 27% /mnt/sander
Output of lspci:
Persephone:/home/phyro# lspci
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 02)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
0000:00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01)
0000:00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev 04)
Base System Installation Checklist:
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Perhaps it is an idea to state the commands to determine cpuspeed, mem, hd-names, etc.
Some of us really have no idea. :)
I had no trouble with installing Debian with beta 1 (didn't file bugreport).
Now I had trouble with installing Grub (then Lilo). It gave an error, that it couldn't install.
I tried to install lilo, which did not gave an error, but the reboot failed.
Somehow it still used grub (error 18).
I think the reason the bootloader failed to install is because I had EZdrive installed.
I overwrote the MBS with MAXblast3 and placed zero's on the HD. Furthermore I installed
the Promise mass storage controller, so the 160 gig secondary HD would be detected.
When I installed again it went flawless.
I'm really looking forward to installing a stable Debian system with Debian installer.
Doesn't matter if it's not Sarge. If I can install Woody with Debian installer, I would
be very very happy also!
Keep up the good work! Thnx for Debian installer!
Regards,
Jochem
Reply to: