Package: installation-reports
Debian-installer-version: businesscard beta 4
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-businesscard.iso
uname -a:
Linux twinette 2.4.26-1-k7 #3 Sun Apr 18 21:43:29 EST 2004 i686 GNU/Linux
Date: Wed May 5 20:16:48 CEST 2004 (Not yet finished)
Method: I simply hit Enter :-)
Install via network (static home network -- no dhcp -- no proxy)
Boot from cdrom
Machine: Laptop HP Pavilion N5441 (Only the Hard drive differ from the
the original one)
Internal Modem: not (yet) working under Linux, AFAIK
Suspend on disk: not (yet) working under Linux AFAIK
Processor: mobile AMD Duron(tm) Processor 850 Mhz
Memory: 256 Mb
Root Device: IDE /dev/hda
Root Size/partition table:
fdisk -l /dev/hda
Disk /dev/hda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 851 6835626 83 Linux
/dev/hda2 852 4664 32234422+ f W95 Ext'd (LBA)
/dev/hda5 852 4802 31736376 83 Linux
/dev/hda6 4803 4864 497983+ 82 Linux swap
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 6.5G 344M 5.8G 6% /
tmpfs 126M 0 126M 0% /dev/shm
/dev/hda5 30G 33M 29G 1% /home
Output of lspci:
stderr : pcilib: Cannot open /sys/bus/pci/devices
stdout :
0000:00:00.0 Host bridge: ALi Corporation M1647 Northbridge [MAGiK 1 / MobileMAGiK 1] (rev 04)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:04.0 CardBus bridge: Texas Instruments PCI1420
0000:00:04.1 CardBus bridge: Texas Instruments PCI1420
0000:00:06.0 Bridge: ALi Corporation M7101 PMU
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:08.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
0000:00:08.1 Communication controller: ESS Technology ESS Modem (rev 12)
0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
0000:00:10.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11)
0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/XP (rev 63)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
1) Problems:
-------------
Debconf template:
Variable {Mont Point} is not replaced in
"Création du système de fichiers ext3 pour le point de montage
{MOUNT_POINT} sur la partition..."
Which is available in /partman/partman-basicfilesystems/debian/po/fr.po
and correspond to #: ../templates:15. It does not seem to be a
French-centric bug.
Module: Network
module tulip was not loaded in the second stage of the installation.
I had to modprobe it by hand and restart networking.
(/etc/init.d/networking restart)
Display:
Buggy screen (frame-buffer?), not debian-installer specific, but anoying.
The problem only occurs on second stage, and the console sometimes did
not get cleanly refresh. I had this problem before, but maybe someone in
the debian-installer team has an idea on the way to fix it :-)
2) Comments:
------------
Fetching packages:
I choosed a mirror and then It started apt-get update, but during that
process the ftp serveur I was using had timeouts, I C-c. I was very
happy to find a nice menu :-)
Pcmcia : detected
[Not yet tested if it is running], and the modem card (serial_cs)
detected.
General Comment: Great Work :-)
Thanks,
--
Pierre Machard
<pmachard@debian.org> http://debian.org
GPG: 1024D/23706F87 : B906 A53F 84E0 49B6 6CF7 82C2 B3A0 2D66 2370 6F87
Attachment:
signature.asc
Description: Digital signature