Bug#247260: (no subject)
Package: installation-reports
Debian-installer-version:
Beta 4; May 2nd 2004;
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a:
Linux linuxbox 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST 2004 i686 GNU/Linux
Date:
May 3rd 2004; ~ 1500h UTC
Method:
booted off CD with netinst.iso; base system from CD, rest from ftp.leo.org
Machine:
Via Epia 800 resp. 5000 motherboard
Processor:
C3 800MHz/500MHz
Memory:
256MB
Root Device:
IDE; /dev/hda
Root Size/partition table:
Disk /dev/hda: 13.5 GB, 13578485760 bytes
16 heads, 63 sectors/track, 26310 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 25317 12759736+ 83 Linux
/dev/hda2 25318 26310 500472 f W95 Ext'd (LBA)
/dev/hda5 25318 26310 500440+ 82 Linux swap
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo
ProMedia] (rev 05)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA
Bridge] (rev 10)
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 24)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 24)
0000:00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller (rev 40)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 51)
0000:00:14.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 50)
0000:00:14.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 50)
0000:00:14.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:01:00.0 VGA compatible controller: Trident Microsystems
CyberBlade/i1 (rev 6a)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The installer is (almost) perfect! Didn't use Debian 'til yesterday
because installing was a hassle.
Minor problem: I selected German as installation language, while the
umlaute (ä& etc.) showed up correctly in the console etc. they were
messed up in the installer's messages.
Reply to: