reassign 243992 kernel tags 238600 - sarge tags 243992 d-i moreinfo merge 238600 243992 thanks I'm assuming this bug is related to the other problems seen with DECChip-based ethernet cards under 2.4.2x; if not, please feel free to unmerge. Thanks, -- Steve Langasek postmodern programmer On Thu, Apr 15, 2004 at 09:44:46PM -0500, Nathan Poznick wrote: > Package: installation-reports > > Debian-installer-version: 04/15/2004 daily netinst from > http://gluck.debian.org/cdimage/testing/daily/alpha/20040415/ > uname -a: > Date: Thu Apr 15 21:23:06 CDT 2004 > Method: Booted from CD (boot -fl 1 dka400) > > Machine: AS2100 4/275 > Processor: Alpha EV45 > Memory: 512MB > Root Device: Would have been on a DAC960 controller > Root Size/partition table: N/A > Output of lspci: (From a shell under the Woody installer) > > # cat /proc/pci > PCI devices found: > Bus 0, device 0, function 0: > Ethernet controller: DEC DC21040 (rev 35). > Medium devsel. Fast back-to-back capable. IRQ 32. Master Capable. Latency=255. > I/O at 0x9000 [0x9001]. > Non-prefetchable 32 bit memory at 0x9000000 [0x9000000]. > Bus 0, device 1, function 0: > SCSI storage controller: NCR 53c810 (rev 2). > Medium devsel. IRQ 33. Master Capable. Latency=255. > I/O at 0x9800 [0x9801]. > Non-prefetchable 32 bit memory at 0x9001000 [0x9001000]. > Bus 0, device 2, function 0: > Non-VGA device: Intel 82375EB (rev 4). > Medium devsel. Master Capable. Latency=248. > Bus 0, device 6, function 0: > RAID storage controller: Mylex DAC960 P Series (rev 2). > Medium devsel. IRQ 34. Master Capable. Latency=255. Min Gnt=4. > I/O at 0xa000 [0xa001]. > Non-prefetchable 32 bit memory at 0x9002000 [0x9002000]. > Bus 0, device 8, function 0: > PCI bridge: DEC DC21152 (rev 3). > Medium devsel. Fast back-to-back capable. Master Capable. Latency=255. Min Gnt=4. > Bus 2, device 0, function 0: > Ethernet controller: DEC DC21142 (rev 65). > Medium devsel. Fast back-to-back capable. IRQ 36. Master Capable. Latency=255. Min Gnt=20.Max Lat=40. > I/O at 0xb000 [0xb001]. > Non-prefetchable 32 bit memory at 0x9100000 [0x9100000]. > Bus 2, device 1, function 0: > Ethernet controller: DEC DC21142 (rev 65). > Medium devsel. Fast back-to-back capable. IRQ 36. Master Capable. Latency=255. Min Gnt=20.Max Lat=40. > I/O at 0xb800 [0xb801]. > Non-prefetchable 32 bit memory at 0x9101000 [0x9101000]. > Bus 2, device 2, function 0: > Ethernet controller: DEC DC21142 (rev 65). > Medium devsel. Fast back-to-back capable. IRQ 36. Master Capable. Latency=255. Min Gnt=20.Max Lat=40. > I/O at 0xc000 [0xc001]. > Non-prefetchable 32 bit memory at 0x9102000 [0x9102000]. > Bus 2, device 3, function 0: > Ethernet controller: DEC DC21142 (rev 65). > Medium devsel. Fast back-to-back capable. IRQ 36. Master Capable. Latency=255. Min Gnt=20.Max Lat=40. > I/O at 0xc800 [0xc801]. > Non-prefetchable 32 bit memory at 0x9103000 [0x9103000]. > > > Base System Installation Checklist: > > Initial boot worked: [E] > Configure network HW: [ ] > Config network: [ ] > Detect CD: [ ] > Load installer modules: [ ] > Detect hard drives: [ ] > Partition hard drives: [ ] > Create file systems: [ ] > Mount partitions: [ ] > Install base system: [ ] > Install boot loader: [ ] > Reboot: [ ] > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Comments/Problems: > > Initial boot fails, it appears to hang while scanning the PCI bus. The > woody installer (2.2.20) boots but doesn't properly deal with the OEM'd > DAC960 controller. > > aboot: loading uncompressed boot/vmlinuz... > aboot: loading compressed boot/vmlinuz... > aboot: zero-filling 393164 bytes at 0xfffffc0000562cc4 > aboot: loading initrd (2842401 bytes/2775 blocks) at 0xfffffc001fc3c000 > aboot: starting kernel boot/vmlinuz with arguments ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 > Linux version 2.4.25-1-generic (herbert@gondolin) (gcc version 3.2.3 20030221 (Debian prerelease)) #1 Tue Feb 24 08:10:58 EST 2004 > Booting GENERIC on Sable using machine vector Sable from SRM > Major Options: LEGACY_START > Command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 > memcluster 0, usage 1, start 0, end 256 > memcluster 1, usage 0, start 256, end 65527 > memcluster 2, usage 1, start 65527, end 65536 > freeing pages 256:384 > freeing pages 740:65527 > reserving pages 740:741 > Initial ramdisk at: 0xfffffc001fc3c000 (2842401 bytes) > t2_init_arch: enabling SG TLB, IOCSR was 0xfe00008423028190 > On node 0 totalpages: 65527 > zone(0): 65527 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0 > Using epoch = 2000 > Turning on RTC interrupts. > Console: colour VGA+ 80x25 > Calibrating delay loop... 543.04 BogoMIPS > Memory: 510872k/524216k available (1658k kernel code, 11296k reserved, 459k data, 176k init) > Dentry cache hash table entries: 65536 (order: 7, 1048576 bytes) > Inode cache hash table entries: 32768 (order: 6, 524288 bytes) > Mount cache hash table entries: 512 (order: 0, 8192 bytes) > Buffer cache hash table entries: 32768 (order: 5, 262144 bytes) > Page-cache hash table entries: 65536 (order: 6, 524288 bytes) > POSIX conformance testing by UNIFIX > pci: enabling save/restore of SRM state > PCI: Bus 1, bridge: Digital Equipment Corporation DECchip 21152
Attachment:
signature.asc
Description: Digital signature