Bug#245546: installation-reports: problem with lwm
Package: installation-reports
Debian-installer-version: daily (2004-04-24) netboot from
http://people.debian.org/~joeyh/d-i/images/daily/netboot/
uname -a: Linux ss20-13 2.4.26-1-686-smp #3 SMP Sun Apr 18 21:28:34 EST 2004 i686 GNU/Linux
Date: 2004-04-23 EEST
Method: Installation via network, from ftp.de.debian.org, without
proxies
Processor: 2x Intel XEON
Memory: 1GB
Root Device: Logical volume (/dev/vg00/root) on IDE drive partition (/dev/hda1)
Root Size/partition table:
proc /proc proc defaults 0 0
/dev/vg00/swap none swap sw 0 0
/dev/vg00/home /home ext3 defaults 0 2
/dev/vg00/local /usr/local ext3 defaults 0 2
/dev/vg00/root / ext3 defaults,errors=remount-ro 0 1
/dev/vg00/tmp /tmp ext3 defaults 0 2
/dev/vg00/usr /usr ext3 defaults 0 2
/dev/vg00/var /var ext3 defaults 0 2
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
0000:00:02.0 PCI bridge: Intel Corp. E7000 Series Hub Interface B PCI-to-PCI Bridge (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:03:01.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper)
0000:03:02.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I created all partitions on the logical volumes. Installation of base
system failed on kernel installation step with the following error
message:
mkinitrd: constituent device /dev/vg00/root does not exist
After that I manually ran:
apt-install devfsd
apt-install lvm10
chroot /target
mount -t devfs /dev /dev
/etc/init.d/devfsd start
/etc/init.d/lvm start
^D
apt-install <kernel-package>
Then I manualy installed lilo, created /etc/lilo.conf and ran lilo.
After that I rebooted the system. And got semi-configured systems that
boots.
Reply to: