Bug#244044: installer experience
Package: installation-reports
Debian-installer-version: beta3
uname -a: Linux cub 2.6.5 #1 Thu Apr 15 17:14:02 BST 2004 i686 GNU/Linux
Date: Fri Apr 16
Method: beta disk 3, then network install from ftp server.
Machine: Acer Tavelmate 800
Processor: pentium M
Memory: 512
Root Device: IDE / Model num IC25N040ATMR04-0
Root Size/partition table:
Disk /dev/hda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 3588 28820578+ c W95 FAT32 (LBA)
/dev/hda2 3589 4226 5124735 83 Linux
/dev/hda3 4864 4864 8032+ 1e Hidden W95 FAT16 (LBA)
/dev/hda4 4227 4863 5116702+ 5 Extended
/dev/hda5 4775 4863 714861 82 Linux swap
/dev/hda6 4227 4774 4401747 83 Linux
/dev/hda6 on / type ext3 (rw,errors=remount-ro)
/dev/hda2 on /home type reiserfs (rw)
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev
03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev
03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
(rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio
Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf
[Radeon Mobility 9000 M9] (rev 01)
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev
01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI
Adapter (rev 04)
0000:02:06.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7114 (rev 20)
0000:02:06.1 CardBus bridge: O2 Micro, Inc.: Unknown device 7114 (rev 20)
0000:02:06.2 System peripheral: O2 Micro, Inc.: Unknown device 7110
0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link)
Base System Installation Checklist:
Initial boot worked: [o]
Configure network HW: [o]
Config network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Create file systems: [o]
Mount partitions: [o]
Install base system: [o]
Install boot loader: [o]
Reboot: [o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
* Partitioning screens a bit confusing - when you select a partition to
format/install etc, it should keep the information on screen about which one
you have selected, instead of hiding it.
cheers
Wolfgang Lehrach
Reply to: