[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#243648: Install report for netinst 20040412



Package: installation-reports

INSTALL REPORT

Debian-installer-version: Daily build 20040412
uname -a: 
Linux brutus 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux
Date: 
Wed Apr 14 10:26:34 EST 2004
Method: netinst CD image, installed via HTTPfrom AU mirror, transparently
proxied

Machine: Noname clone
Processor: Intel Pentium IV
Memory: 256M
Root Device: IDE, /dev/hda2
Root Size/partition table:  

Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        7295    58597056    7  HPFS/NTFS
/dev/hda2            7296        7326      249007+  83  Linux
/dev/hda3            7327        7388      498015   83  Linux
/dev/hda4            7389       14593    57874162+  8e  Linux LVM

Filesystem    Type     Size   Used  Avail Use% Mounted on
/dev/hda2     ext3     239M    50M   178M  22% /
tmpfs        tmpfs     132M      0   132M   0% /dev/shm
/dev/base/home
              ext3     1.1G   8.5M   945M   1% /home
/dev/base/tmp ext3     1.1G   8.5M   945M   1% /tmp
/dev/base/usr ext3     4.3G   148M   3.9G   4% /usr
/dev/base/var ext3     4.3G   144M   3.9G   4% /var

Output of lspci and lspci -n:

pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 12)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
0000:03:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
0000:03:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:03:02.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller

pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Class 0600: 8086:1a30 (rev 03)
0000:00:01.0 Class 0604: 8086:1a31 (rev 03)
0000:00:1e.0 Class 0604: 8086:244e (rev 12)
0000:00:1f.0 Class 0601: 8086:2440 (rev 12)
0000:00:1f.1 Class 0101: 8086:244b (rev 12)
0000:00:1f.2 Class 0c03: 8086:2442 (rev 12)
0000:00:1f.3 Class 0c05: 8086:2443 (rev 12)
0000:00:1f.4 Class 0c03: 8086:2444 (rev 12)
0000:01:00.0 Class 0300: 10de:0110 (rev b2)
0000:03:00.0 Class 0401: 1274:5000 (rev 01)
0000:03:01.0 Class 0200: 8086:1229 (rev 08)
0000:03:02.0 Class 0c00: 104c:8019

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

The Go Back button doesn't seem to go back within the LVM logical volume
creation and deletion screens.

I think the keyboard chooser screen didn't display properly. There was no
title.

I was slightly confused by the partition screen, the option to continue was
at the top, and after I'd finished setting up all my logical volumes, this
had scrolled off the top of the dialog box, and there were no buttons at the
bottom that looked useful.

One thing to note (I was just skimming over this before I sent it and
noticed) is that my swap partition seems to be of type 83. I'm positive I
selected it be a swap partition, and it looks like partman's gone off and
made a type 83 partition. Net result is, I have no swap currently in use...
My hda3 partition does have a swap signature, so I'd say the mkswap
happened...

It still picked a less-ideal kernel for my system (i386 instead of i686)

Here's my /proc/cpuinfo:

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 0
model name	: Intel(R) Pentium(R) 4 CPU 1500MHz
stepping	: 7
cpu MHz		: 1503.465
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips	: 3001.54




Reply to: