[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#243623: (no subject)



Package: installation-reports

Debian-installer-version: 14-Mar-2004 21:19 (aka beta3)
http://http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/floppy/
uname -a: Linux pc05 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i586 GNU/Linux
Date: Tue Apr 13 22:18:06 CEST 2004
Method: floppy install and then via network from ftp.de.debian.org
without proxy
Machine: NoName, Mainboard Elitegroup P5TX-Bpro
Processor: Intel Pentium 233 MMX
Memory: 64 MB
Root Device: IDE, Seagate ST33221A
Root Size/partition table:

Disk /dev/hda: 3228 MB, 3228696576 bytes
128 heads, 63 sectors/track, 782 cylinders
Units = cylinders of 8064 * 512 = 4128768 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1               1          64      258016+  82  Linux swap
/dev/hda2              65         696     2548224   83  Linux

/dev/hda1 swap
/dev/hda2 on / type ext3 (rw,errors=remount-ro)


Output of lspci:

pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
0000:00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54)
0000:00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
0000:00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0c.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02)


Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

The installation was quite easy and without any complications. There's
only one error (I'm still getting) from lspci (please take a look at
its output above). Another weird thing shows up to mountpoints (/cdrom
and /cdrom0) for only one CD Drive.

One thing you should change is the information "(keine Tottasten)"
while selecting the keyboard. "Tottasten" isn't a german word, I
couldn't find out what's ment here.

I wasn't able to declare my local apt-proxy as installationsource,
cause debian-installer always reported an error while connecting to
it.

Regards
Roland




Reply to: