Bug#242899: Installation report
Package: installation-reports
Debian-installer-version: beta3 netinst from
http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso
uname -a: Linux duck 2.6.5 #1 SMP Tue Apr 6 22:42:51 BST 2004 i686
GNU/Linux
Date: 31 March 2004
Method: From netinstall CD. Booted off CD attached to onboard IDE.
Machine: Custom - Abit IC7-G (i875P) motherboard, GeForce 2 MX, Pioneer
DVD-ROM, etc.
Processor: Pentium 4 2.8GHz HT
Memory: 512MB DDR Kingston PC3200 (2x256)
Root Device: Onboard IDE, IBM Deskstar 180GXP, 120GB IC35L120AVV207-0
Root Size/partition table:
Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x83 15 63 194 63 196497
/boot
2 0x00 0 1 195 0x82 15 63 1023 196560 4000752 swap
3 0x00 15 63 1023 0x83 15 63 1023 4197312 39063024 /
4 0x00 15 63 1023 0x83 15 63 1023 43260336 197994384
/home
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev
02)
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller
(rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA
Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface
to PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11
[GeForce2 MX/MX 400] (rev a1)
0000:02:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet
Controller
0000:03:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
0000:03:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The was NIC not automatically detected, and it was necessary to know
that e1000 module was the correct one. Maybe some sort of description
alongside the module names would be useful (e.g. Intel Gigabit, RealTek
8139, etc.)
When partitioning the drives, strange icons appeared next to each
partition (smiley, lightining bolt, etc.) It was not obvious what these
were supposed to be mean.
Otherwise everything worked brilliantly.
Reply to: