Bug#241072: installation-reports: beta 3 fails on hp rx2600
Package: installation-reports
Version: beta 3
Severity: grave
Justification: renders package unusable
Debian-installer-version: http://gluck.debian.org/cdimage/testing/sarge_d-i/ia64/beta3/sarge-ia64-netinst.iso
uname -a: todd 2.4.20-mckinley-smp #1 SMP Tue Dec 9 17:04:43 MST 2003 ia64 unknown
Date: Tue, 30 Mar 2004 9:52:29 -0500
Method: boot from IDE CD-ROM
Machine: HP rx2600
Processor: 2x Itanium2
Memory: 12GB
Root Device: SCSI sda
Root Size/partition table: N/A
Output of lspci:
00:01.0 USB Controller: NEC Corporation USB (rev 41)
00:01.1 USB Controller: NEC Corporation USB (rev 41)
00:01.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 02)
00:02.0 IDE interface: CMD Technology Inc PCI0649 (rev 02)
00:03.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
0d)
00:1c.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
00:1d.0 Bridge: Hewlett-Packard Company: Unknown device 122a (rev 22)
00:1e.0 Bridge: Hewlett-Packard Company: Unknown device 1229 (rev 22)
20:01.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c1030 (rev 07)
20:01.1 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c1030 (rev 07)
20:02.0 Ethernet controller: BROADCOM Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
20:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
40:01.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c1010 66MHz Ultra3 SCSI Adapter (rev 01)
40:01.1 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c1010 66MHz Ultra3 SCSI Adapter (rev 01)
40:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
60:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
80:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
c0:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
e0:01.0 Communication controller: Hewlett-Packard Company: Unknown
device 1290 (rev 01)
e0:01.1 Serial controller: Hewlett-Packard Company: Unknown device 1048
(rev 03)e0:02.0 VGA compatible controller: ATI Technologies Inc Radeon
VE QY
e0:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev
32)
Base System Installation Checklist:
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The CD did not autoboot, but I didn't expect it to. After selecting the
CD drive from the EFI menu and running elilo, the installer started and
I was presented with the initial menu prompting me to select a language.
I could not select a language since the keyboard was non-responsive. HP
rx2600's only have USB (no PS/2) ports and the USB keyboard support
was not available on the ISO I tested. Perhaps the hardware detection
could be run earlier to get around this issue.
Reply to: