Bug#239821: installation-reports

[Matteo Michelini <havvk_box@aliceposta.it>]

Package: installation-reports

Debian-installer-version: beta3 
<http://www.debian.org/devel/debian-installer/>
uname -a: Linux darkbox 2.4.25 #1 sab mar 20 18:38:08 CET 2004 i686 GNU/Linux
Date: 19 March 2004 at 9 pm
Method: just pressing enter at the boot promt and having a base installation 
from the cd (not from the network)

Machine: Desktop 
Processor: 800Mhz
Memory: 384MB SRAM
Root Device: EIDE-ATAPI Vendor: HL-DT-ST  Model: CD-RW GCE-8240B   Rev: 1.07
Root Size/partition table: 
Filesystem         Dimens. Usati Disp. Uso% Montato su
/dev/hda1             1,9G   72M  1,7G   5% /
/dev/hda6             7,4G  1,6G  5,5G  22% /usr
/dev/hda7             4,6G  551M  3,9G  13% /var
/dev/hda8             4,7G  267M  4,4G   6% /home

Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] 
(rev 44)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x 
AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 
23)
00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 11)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
00:09.0 Communication controller: Analog Devices SM56 PCI modem
00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:0c.0 Ethernet controller: Winbond Electronics Corp W89C940 (rev 0b)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x 
TMDS

Base System Installation Checklist:

Initial boot worked:    [O ]
Configure network HW:   [ O]
Config network:         [ ]
Detect CD:              [ O]
Load installer modules: [ O]
Detect hard drives:     [ O]
Partition hard drives:  [ O]
Create file systems:    [ O]
Mount partitions:       [ O]
Install base system:    [ O]
Install boot loader:    [ O]
Reboot:                 [ O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:
I didn't find any kind of problems during the test on my machine. The problems 
started after the reboot during the base-config. Great job!