Bug#239764: Package: installation-reports
Package: installation-reports
Debian-installer-version: 17th march 2004 from http://gluck.debian.org/cdimage/testing/sarge_d-i/
uname -a: Linux gordon 2.6.4 #1 Thu Mar 18 14:48:08 CET 2004 i686 GNU/Linux
Date: Thursday 18th march 2004 at about 15h
Method: Install with the sarge beta3 cd, and after other packages by apt-get
Machine: Asus A7V333-RAID, many hd (240 gigs), Geforce 4 ti 4200, Creative Audigy etc...
Processor: Athlon XP 1900+
Memory: 512 DDR PC 2100
Root Device: hde3, IDE from the RAID Controler (Promise PDC20276)
Root Size/partition table:
Disk /dev/hde: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hde1 * 1 6403 51432066 c W95 FAT32 (LBA) <-- which will be deleted soon :)
/dev/hde2 6404 6468 522112+ 82 Linux swap
/dev/hde3 6469 9726 26169885 83 Linux
Disk /dev/hdg: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdg1 1 14593 117218241 c W95 FAT32 (LBA)
Disk /dev/hdh: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdh1 1 4865 39078081 c W95 FAT32 (LBA)
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:06.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev 01)
00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
00:0d.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23)
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
All works great and my RAID Controler (Promise Technology, Inc. PDC20276 IDE) is now detected !
The woody setup didn't find this controler and with sarge installer with 2.4.25, it rox !
Great job !
Reply to: