Bug#239402: installation-reports: [beta3] should ask again for proxy informations when download fails

[Olivier Trichet <trichet.olivier@ec-lille.fr>]

Package: installation-reports
Severity: normal

Debian-installer-version: 22/03/2004 - beta3 i386 floppy from d-i pages
uname -a: Linux neige 2.4.25-1-k7 #1 Tue Feb 24 14:2428 EST 2004 i686 GNU/Linux
Date: 22/03/2004 10h00 
Method: Network installation with (boot and root) floppies 
 If network install, from where?
 	ftp.belnet.be via http
 Proxied?
 	yes

      Machine: N/A
      Processor: Athlon 1.4
      Memory: 256MB
      Root Device: IDE hda (Western Digital WDC WD300BB-00CCB0)
      Root Size/partition table:
      
Disk /dev/hda: 30.0 GB, 30020272128 bytes
255 heads, 63 sectors/track, 3649 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start  End    Blocks    Id  System
   /dev/hda1        1      2550   20482843+ c   W95 FAT32 (LBA)
   /dev/hda2        2551   3650   8833766   5   Extended
   /dev/hda5        2551   2945   3172806   83  Linux         root /
   /dev/hda6        2946   2970   200781    82  Linux swap    
   /dev/hda7        2971   3650   5460115+  83  Linux         /home
   
    hda{5,6,7} already formatted (and format was well recognized)
	    
	    Output of lspci:

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 18)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 18)
00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 18)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)


	    Base System Installation Checklist:

	    Initial boot worked:    [O]
	    Configure network HW:   [O]
	    Config network:         [O]
	    Detect CD:              [ ]
	    Load installer modules: [ ]
	    Detect hard drives:     [O]
	    Partition hard drives:  [O]
	    Create file systems:    [ ]
	    Mount partitions:       [O]
	    Install base system:    [O]
	    Install boot loader:    [O]
	    Reboot:                 [O]
	    [O] = OK, [E] = Error (please elaborate below), [ ] = didn't
	    try it

	    Comments/Problems:

Everything was OK during the installation, but the retrieving of the
package for the base system. I mistype the name of the proxy
during the configuration, and I have not been asked again for entering
the proxy name. As a consequence, the download always failed...

So, in case of error during this download, the user should be prompted
again in order to give the good information.

Thanks for your job,
Olivier

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.25-neige+mga+usb
Locale: LANG=fr_FR@euro, LC_CTYPE=fr_FR@euro (ignored: LC_ALL set to fr_FR@euro)