[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#239016: Package: installation-reports



Package: installation-reports

INSTALL REPORT

Debian-installer-version:http://gluck.debian.org/cdimage/testing/sarge_d
-i/i386/beta3/sarge-i386-businesscard.iso
uname -a: Linux mcflow 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686
GNU/Linux
Date: Friday 19 Mar 2004
Method: Burn ISO, boot from CD, follow prompts, download from .nz ftp on
ethernet port on pc, through a router that uses dial up, no proxy.

Machine: Via epia cl-6000 mini-itx PC
Processor: embedded via eden c3 600mhz
Memory: 256mb ddr 266 legend using hynix chips
Root Device: seagate barracuda ata iii st340824a 40gb - to be changed to
compact flash to ide adaptor with 256mb compact flash.

Root Size/partition table:  root 4gb, swap 512

Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0f.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III]
(rev 8b)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Went well. I was pleased it installed on the via c3 eden first time.
Would like to know consequence of action - like if I push the next
button, how many Mb is it going to want to download. (slow dial up).
Also perhaps on some screens ... "read http:// to find out more about
this step"
Perhaps a step 5 of 25 on each screen in an unused corner.
davemc@mcpond.co.nz




Reply to: