[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#239012: sun ultra 2 beta 3 install



Package: installation-reports

INSTALL REPORT

Debian-installer-version: sparc beta3 mini-iso
	http://ftp.debian.org/debian/dists/unstable/main/installer-sparc/beta3/images/cdrom-mini.iso
uname -a: Linux dumbluck 2.4.24-sparc64-smp #1 SMP Fri Jan 30 19:06:19 EST 2004 sparc64 GNU/Linux
Date: 2004-03-19 23:30 PST
Method: How did you install?  mini-iso
	What did you boot off?  cdrom
	If network install, from where? debian.oregonstate.edu
	Proxied? no

Machine: Sun Ultra 2
Processor: 2 x 167 Mhz Ultrasparc I
Memory: 192 MB
Root Device: 9GB Scsi /dev/sda1
Root Size/partition table:  8.6 Gb
Output of lspci:

Serial console
Creator framebuffer installed but unused. 
No sbus cards installed.

Base System Installation Checklist:

Initial boot worked:    [O ]
Configure network HW:   [O ]
Config network:         [EEO ]
Detect CD:              [E ]
Load installer modules: [O ]
Detect hard drives:     [O ]
Partition hard drives:  [O ]
Create file systems:    [O ]
Mount partitions:       [O ]
Install base system:    [O ]
Install boot loader:    [O ]
Reboot:                 [EO* ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

The first two tries to use DHCP failed, changing cable/switch port
each time.  The third time worked.  The switch indicated the
connection was at 10Mbps.  This could be a problem for others, if it
isn't due to flakey hardware.  After reboot the system went to 100Mbps
full duplex.

Loading sr_mod failed.  This needs to be fixed so we can do
non-network installs.  The busybox modprobe is broken on sparc64, and
I've also had problems with the one in the udeb, so this isn't a new
problem.

The first reboot failed, however power cyclining the system got me
through the second-stage installer.  Errors about respawning were 
received.

After the second stage installer, it left my system unusable.  
It failed to enable a getty for my serial console.

Booting "linux init=/bin/sh" allowed me to edit /etc/inittab to
disable the useless console gettys and enable the serial port getty.

While there were a few glitches, this was my first successfull use of
debian-installer on sparc.



-- 
Blars Blarson			blarson@blars.org
				http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.



Reply to: