Bug#238665: installation-report for d-i 20040315
Package: installation-reports
Debian-installer-version: Official BuisnessCard Snapshot i386 Binary-1
(20040315)
uname -a: Linux tagore 2.4.25-1-386 # Tue Feb 24 08:11:13 EST 2004 i686
GNU/Linux
Date: 2004-03-18 10:30
Method: Boot from cd and then network install from ftp.se.debian.org
Machine: HP Compaqd530 SFF
Processor: pentium4 3GHz
Memory: 512MB RAM
Root Device: IDE 40GB
Root Size/partition table:
/dev/hda1 35GB ext3 /
/dev/hda5 5GB swap
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller
(rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated
Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev
02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller
(rev 02)00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage
Controller (rev 02)00:1f.5 Multimedia audio controller: Intel Corp.
82801EB AC'97 Audio Controller (rev 02)
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782
Gigabit Ethernet (rev 03)
lspci -v -s05:02.0
05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782
Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company: Unknown device 12bc
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 20
Memory at fc500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [o]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
To configure the networkhardware I had to select the tg3 modele self
but then it worked
I first selected a automatic partition but wanted a larger swap and this
canging of sizes felt unnesesarily hard
After the reboot the networkmodule (tg3) was not loaded and therfore the
network didn't work
--
jens persson # Our informal mission is to improve the love
<jens@persson.cx> # life of operators worldwide.
Mäster Olofsväg 24 # -- Peter Behrendt, president of Exabyte
S-224 66 LUND;SWEDEN #
Reply to: