Bug#238472: installation-reports: default base system reboots automatically
Package: installation-reports
Severity: grave
Justification: renders package unusable
Debian-installer-version: beta 3 from http://www.debian.org/devel/debian-installer/
uname -a: Linux winter 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux
Date: 2004-03-17 15:00 GMT+8
Method: 100 MB CD image, includes Debian base, no network install yet.
Machine: PC (vendor: LEGEND)
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz
Memory: 512MB
Root Device: Maxtor 6Y080L0, ATA DISK drive
Root Size/partition table:
Disk /dev/hda: 78.1 GB, 78197737472 bytes
255 heads, 63 sectors/track, 9507 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1020 8193118+ 7 HPFS/NTFS
/dev/hda2 1021 9506 68163795 f W95 Ext'd (LBA)
/dev/hda5 1021 3631 20972826 83 Linux
/dev/hda6 3632 6242 20972826 83 Linux
/dev/hda7 6243 6275 265041 82 Linux swap
/dev/hda8 6276 9506 25952976 83 Linux
root partition is /dev/hda8 and swap is /dev/hda7, others are not
mounted.
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
02:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't
try it
Comments/Problems:
It reboots automatically when I configuring the base system, and
reboot agian just when the system is up for about one minute.
It is cause by the 'i810-tco' kernel module loaded by discover.
Disable loading the module works. The system never reboots again.
About 1 minute after I 'modprobe i810-tco' it reboots again.
Reply to: