Bug#234687: Boot fails on g5 desktop

[Mattias Wadenstein <maswan@acc.umu.se>]

Package: installation-reports

INSTALL REPORT

Debian-installer-version: gluck daily netinst, 2004-02-19
uname -a: n/a
Date: 2004-02-19
Method: Booted from CDROM

Machine: Powermac G5 Desktop
Processor: 2 x ppc 970 @ 2.0GHz
Memory: 4G
Root Device: Maxtor 250G SATA drive
Root Size/partition table:  n/a
Output of lspci:

In mac-speak:
http://www.acc.umu.se/~maswan/debian/g5-hardware.txt

Relevant part, I think:
PCI/AGP Cards:

    ATY,R350:

      Type: display
      Bus: AGP
      Slot: SLOT-1
      VRAM (Total): 128 MB
      Vendor: ATI (0x1002)
      Device ID: 0x4e48
      Revision ID: 0x0000
      ROM Revision: 113-A14401-116

        ATY,Rocket_A:

          Type: display
          Display Type: LCD
          VRAM (In Use): 128 MB

        ATY,Rocket_B:

          Status: No display connected


Base System Installation Checklist:

Initial boot worked:    [E]
Configure network HW:   [ ]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

Does not give any output after "opening display" with a string indicating
the graphics card referenced above.

/Mattias Wadenstein