[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#234322: marked as done (installation-reports: HP/Compaq nc6000 Laptop)



Your message dated Mon, 23 Feb 2004 21:41:47 +0100
with message-id <403A658B.3020806@debian.org>
and subject line Processed
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--------------------------------------
Received: (at submit) by bugs.debian.org; 23 Feb 2004 07:00:43 +0000
>From sfr@gallien.de Sun Feb 22 23:00:43 2004
Return-path: <sfr@gallien.de>
Received: from postman4.arcor-online.net (postman.arcor.de) [151.189.0.154] 
	by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
	id 1AvA55-0004kl-00; Sun, 22 Feb 2004 23:00:43 -0800
Received: from mail.gallien.de (p508ABE73.dip.t-dialin.net [80.138.190.115])
	(authenticated bits=0)
	by postman.arcor.de (8.13.0.PreAlpha4/8.13.0.PreAlpha4) with ESMTP id i1N70YUa010077
	(version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO);
	Mon, 23 Feb 2004 08:00:35 +0100 (MET)
Received: from asterix.gallien.de (asterix.gallien.de [192.168.1.2])
	(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
	(No client certificate requested)
	by mail.gallien.de (Postfix) with ESMTP
	id 9F55A27C9E; Mon, 23 Feb 2004 07:35:03 +0100 (CET)
Received: by asterix.gallien.de (Postfix, from userid 1000)
	id C2E1857569; Mon, 23 Feb 2004 07:35:02 +0100 (CET)
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Stefan Frank <sfr@gmx.net>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: installation-reports: HP/Compaq nc6000 Laptop
X-Mailer: reportbug 2.39
Date: Mon, 23 Feb 2004 07:35:02 +0100
Message-Id: <[🔎] 20040223063502.C2E1857569@asterix.gallien.de>
Delivered-To: submit@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_02_22 
	(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-5.0 required=4.0 tests=HAS_PACKAGE autolearn=no 
	version=2.60-bugs.debian.org_2004_02_22
X-Spam-Level: 

Package: installation-reports
Severity: normal


Debian-installer-version: daily snapshot dated 20040220 from the d-i website

uname -a: Linux laptop 2.4.24-1-386 #1 Wed Feb 18 19:44:56 EST 2004 i686 GNU/Linux

Date: Sat, Feb 21 2004 18:25 UTC+1
Method: CD based installation of the base system, updated to unstable later on

Machine: HP/Compaq nc6000 Laptop
Processor: Pentium M 1.6 GHz
Memory: 512 MB DDR
Root Device: IDE hda: FUJITSU MHT2040AH, ATA DISK drive

Root Size/partition table: 
laptop:/lib/modules# fdisk -l /dev/hda

Disk /dev/hda: 40.0 GB, 40007761920 bytes
240 heads, 63 sectors/track, 5168 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        1355    10243768+   7  HPFS/NTFS
/dev/hda2            2033        5167    23700600    7  HPFS/NTFS
/dev/hda3            1356        1969     4641840   83  Linux       <- /
/dev/hda4            1970        2032      476280    5  Extended
/dev/hda5            1970        2032      476248+  82  Linux swap

Partition table entries are not in disk order

Output of lspci:

00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4e50
02:06.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7223
02:06.1 CardBus bridge: O2 Micro, Inc.: Unknown device 7223
02:06.2 System peripheral: O2 Micro, Inc.: Unknown device 7110
02:06.3 CardBus bridge: O2 Micro, Inc.: Unknown device 7223
02:0e.0 Ethernet controller: Broadcom Corporation: Unknown device 165e (rev 03)

Base System Installation Checklist:

Initial boot worked:    [o]
Configure network HW:   [o]
Config network:         [o]
Detect CD:              [o]
Load installer modules: [o]
Detect hard drives:     [o]
Partition hard drives:  [o]
Create file systems:    [o]
Mount partitions:       [o]
Install base system:    [o]
Install boot loader:    [o]
Reboot:                 [o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

I needed to use a snapshot as the built-in broadcom network card is not supported in the beta 2 release (newer kernel required)

- selecting a network card driver
  instead of only listing the module names, a list of cards supported by each
  driver should be available. only by reading Bdale's installation report
  using a nc4000 i figured which driver i needed (tg3 isn't very descriptive). 

- installing GRUB
  in console3 (the installation log) it says that installing GRUB can take
  a long time. This should better be shown in the installer window.
  I hit ESC, CTRL-C accidentally before reading this note.

- list of steps in the installation process
  it'd be nice if each item in this list would get marked once it's done.
  so when going back to the main menu before rebooting it would be easy
  to check any missing steps (if skipping one step is actually possible)

Issues after 1st reboot (2nd stage installer)

- Timezone selection is too us-centric ;-)

Otherwise the basic installation went smoothly. Congrats to the developers!
default X 4.3.0-2 only works with the vesa driver. Use ATI's radeon/firegl
drivers to enable other features like xv.

Bye, Stefan


-- System Information:
Debian Release: sid
Architecture: i386
Kernel: Linux asterix 2.4.20-wolk4.2s #1 Mon Jun 30 16:33:41 CEST 2003 i686
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (ignored: LC_ALL set to de_DE@euro)


---------------------------------------
Received: (at 234322-done) by bugs.debian.org; 23 Feb 2004 18:16:38 +0000
>From magnus@debian.org Mon Feb 23 10:16:38 2004
Return-path: <magnus@debian.org>
Received: from mother.ludd.ltu.se [130.240.16.3] 
	by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
	id 1AvKdB-00071T-00; Mon, 23 Feb 2004 10:16:37 -0800
Received: from debian.org (oxtan.campus.luth.se [130.240.202.148])
	by mother.ludd.ltu.se (8.12.10+Sun/8.12.10) with ESMTP id i1NIGUAr024650
	for <234322-done@bugs.debian.org>; Mon, 23 Feb 2004 19:16:33 +0100 (MET)
Message-ID: <403A658B.3020806@debian.org>
Date: Mon, 23 Feb 2004 21:41:47 +0100
From: Magnus Ekdahl <magnus@debian.org>
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.6) Gecko/20040122 Debian/1.6-1
X-Accept-Language: en
MIME-Version: 1.0
To: 234322-done@bugs.debian.org
Subject: Processed
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Delivered-To: 234322-done@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_02_22 
	(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=0.0 required=4.0 tests=none autolearn=no 
	version=2.60-bugs.debian.org_2004_02_22
X-Spam-Level: 

Thank you for the information you have supplied regarding
this problem report.

The report have been categorised and problems reassigned to their 
respective package.

 >- selecting a network card driver
 >instead of only listing the module >names, a list of cards supported by
 >each driver should be available. >only by reading Bdale's installation
 >report using a nc4000 i figured >which driver i needed (tg3 isn't very
 >descriptive).

have been reassigned to the package netcfg and merged with bug 234395[1]

1. bugs.debian.org/234395


 >- installing GRUB
 >in console3 (the installation log) it says that installing GRUB can
 >take a long time. This should better be shown in the installer window.
 >I hit ESC, CTRL-C accidentally before reading this note.

have been reassigned to the package grub-installer as bug 234396[2]

2. bugs.debian.org/234396


 >- list of steps in the installation process
 >it'd be nice if each item in this list would get marked once it's done.
 >so when going back to the main menu before rebooting it would be easy
 >to check any missing steps (if skipping one step is actually possible)

Please see INSTALLATION-HOWTO s 3.1


 >Issues after 1st reboot (2nd stage installer)
 >
 >- Timezone selection is too us-centric ;-)

have been reassigned to the package base-config as bug 234397[3]

3. bugs.debian.org/234397

-- 
Magnus Ekdahl 0739-287181 magnus@debian.org maguno@ludd.ltu.se
public key available at http://oxtan.campus.luth.se/magnus.public
Key fingerprint = 18DE CB62 8A86 374E 824E  09ED 1987 4B18 1213 79F6



Reply to: