Package: installation-reports
Debian-installer-version: Netinst daily build 20040217
Linux debian 2.4.24-1-686-smp #1 SMP Wed Feb 4 21:29:16 EST 2004 i686 GNU/Linux
Date: Mon, 23 Feb 2004 13:36:44 +0100
Method: netinst daily build cd, further installation from ftp2.de.debian.org
Machine: Fujitsu Siemens RX/300
Processor: 2xP4 2.6Ghz
Memory: 1GByte
Root Device: dpt_io adaptec hw raid1
Root Size/partition table:
debian:~# fdisk -l /dev/sda
Disk /dev/sda: 72.7 GB, 72771174400 bytes
255 heads, 63 sectors/track, 8847 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 249 2000061 82 Linux swap
/dev/sda2 * 250 8847 69063435 83 Linux
Output of lspci:
debian:~# lspci
00:00.0 Host bridge: ServerWorks CNB20-HE Host Bridge (rev 33)
00:00.1 Host bridge: ServerWorks CNB20-HE Host Bridge
00:00.2 Host bridge: ServerWorks CNB20-HE Host Bridge
00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:08.0 Class ff00: Siemens Nixdorf AG FSC Remote Service Controller, mailbox device
00:08.1 Class ff00: Siemens Nixdorf AG FSC Remote Service Controller, shared memory device
00:08.2 Class ff00: Siemens Nixdorf AG FSC Remote Service Controller, SMIC device
00:0f.0 Host bridge: ServerWorks CSB6 South Bridge (rev a0)
00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0)
00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: ServerWorks GCLE-2 Host Bridge
00:10.0 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
00:10.2 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
03:08.0 RAID bus controller: Distributed Processing Technology SmartRAID V Controller (rev 01)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
- No problems
Wishlist:
- Automatic SMP kernel-image selection on SMP machines.
- Partitioning felt complicated
Flo
--
Florian Lohoff flo@rfc822.org +49-171-2280134
Heisenberg may have been here.
Attachment:
pgpjNBv3BgE4_.pgp
Description: PGP signature