Package: installation-reports
Debian-installer-version: 2004.02.22 daily image from
http://people.debian.org/~joeyh/d-i/images/daily/
uname -a: Linux version 2.4.24-1-386 (herbert@gondolin) (gcc version 3.3.2
(Debian)) #1 Wed Feb 18 19:44:56 EST 2004
Date: 2004.02.22 16:20 - 18:30
Method: boot from floppy, root from floppy, use of cd-driver floppy, rest from
CD-Rom
Machine: IBM PC330, Type 6577
Processor: Pentium 166MHz
Memory: 80732160 Byte
Root Device: WDC AC32500H, ATA DISK drive, 4999680 sectors (2560 MB) w/128KiB
Cache, CHS=4960/16/63
Root Size/partition table: hda1 / 2400MB (root), hda5 / 160MB (swap)
Output of lspci: PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 3).
Master Capable. Latency=32.
Bus 0, device 1, function 0:
ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 1).
Bus 0, device 1, function 1:
IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (rev 0).
Master Capable. Latency=32.
I/O at 0xffa0 [0xffaf].
Bus 0, device 1, function 2:
USB Controller: Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II] (rev 1).
IRQ 10.
Master Capable. Latency=48.
I/O at 0x4040 [0x405f].
Bus 0, device 6, function 0:
Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev
1).
IRQ 9.
Master Capable. Latency=16. Min Gnt=2.Max Lat=24.
I/O at 0x4000 [0x403f].
I/O at 0x4070 [0x407f].
I/O at 0x4060 [0x406f].
I/O at 0x4084 [0x4087].
I/O at 0x4080 [0x4083].
Bus 0, device 8, function 0:
VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 84).
IRQ 9.
Non-prefetchable 32 bit memory at 0x40000000 [0x43ffffff].
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [O]
Reboot: [E]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I have a isapnp network card ATI AT2000 but at the moment of installation no
LAN is available thus it is of no use to detect the network HW (I tried it
with the net-driver disk and it is detected)
The installation is done via CD-ROM (testing image from 01.02.2004 week)
The CD-ROM drive used is a "Pioneer CD-ROM ATAPI Model DR-944 0107" and it is
detected using the cd-driver disk. I use CD-RW media.
The base system installation comes up with an error message.
Looking in /var/log/debootstrap.log there is a problem with:
libopencdk8 that depends on libgcrypt7
libgcrypt7 depends on libgpg-error0
libgpg-error0 is not installed but i can locate it on the CD
pool/main/libg/libgpg-error/libgpg-error0_0.6-0.1_i386.deb
It was possible to install it by hand using
"chroot /target dpkg -i /tmp/libgpg-error0_0.6-0.1_i386.deb"
after copying the package to /target/tmp/
A second run of the base system installation still comes with an error.
I tried to install the boot loader (LILO) this was OK
but rebooting the system comes to hang after changing into the init level 2.
The system only reacts on Ctrl-Alt-Del -> with a reboot.
I tried to use the menu topic to save the debug reports to floppy:
- It does nothing: after 10s the menu comes back but nothing is written to the
floppy.
- In the shell I was able to locate the problem the tar version used is not
capable to create an archive stops with an error in -c option. Thus the
script exits but nothing is shown to the menu user.
- I modified the script in order not to use tar and the debug report files are
written to the floppy. On my working system I did a tar -czf ... This files
are attached to this mail.
I hope this can help you
Georges Schutz
Attachment:
debugdebinstall2003.02.22.tgz
Description: application/tgz