Bug#233957: Package: installation-reports
Package: installation-reports
Debian-installer-version: <beta2>
uname -a: <Linux herrenpfad 2.4.22-1-386 #2 SMP Fri Feb 20 21:05:14 CET 2004
i686 GNU/Linux>
Date: <19-02-2004>
Method: <Install from CD>
Machine: <ASUS P2L97-DS, ICP/Vortex 6113RS, >
Processor: dual P-III
Memory: 512 MB
Filesystem Size Used Avail Use% Mounted on
/dev/scsi/host0/bus0/target0/lun0/part2
487M 117M 370M 25% /
/dev/scsi/host0/bus0/target0/lun0/part5
3.9G 209M 3.7G 6% /usr
/dev/scsi/host0/bus0/target0/lun0/part8
3.9G 524M 3.4G 14% /usr/src
/dev/scsi/host0/bus0/target0/lun0/part6
3.9G 96M 3.8G 3% /var
/dev/scsi/host0/bus0/target0/lun0/part7
22G 41M 22G 1% /var/log
/dev/scsi/host0/bus0/target1/lun0/part1
35G 35M 35G 1% /var/spool/squid
Output of lspci:
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:09.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:0a.0 SCSI storage controller: ICP Vortex Computersysteme GmbH GDT
6113RS/6513RS
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX
400] (rev b2)
02:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
02:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
02:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
02:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
factory-new IBM scsi disks on gdt controller.
cfdisk detected an invalid partition table.
So did fdisk on the console.
After writing a valid but empty partition
table using fdisk all went fine.
If swap is not handled first the installer incorrectly uses the last
mounting point
and consequently has a problem
Reply to: