Package: installation-reports The following installation report was posted to debian-boot, and, according to my records, never followed up on. I am putting it in the BTS so it will not be lost. ----- Forwarded message from Steve Haavik <shaavik@soc.lib.md.us> ----- From: Steve Haavik <shaavik@soc.lib.md.us> Date: Mon, 15 Dec 2003 10:35:06 -0500 (EST) To: debian-boot@lists.debian.org Subject: installation report Package: installation-reports INSTALL REPORT Debian-installer-version: http://gluck.debian.org/~sjogren/d-i/images/2003-12-15/ Date: Mon Dec 15 09:39:46 EST 2003 Method: Floppy images (bootfloppy-image.img, floppy-image.img, net_drivers-image.img, and cd_drivers-image.img) from the daily build listed above. Machine: Gateway 955 (http://products.gateway.com/products/GConfig/prodDetails.asp?system_id=gtwy955) Processor: Intel Xeon 1.8GHz Memory: 512 Meg Root Device: aic7902 Root Size/partition table: Didn't get that far. Output of lspci: 00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01) 00:00.1 Class ff00: Intel Corp. E7000 Series Host RASUM Controller (rev 01) 00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge (rev 01) 00:03.1 Class ff00: Intel Corp. E7000 Series Hub Interface C RASUM Controller (rev 01) 00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02) 01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 03:07.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) 03:07.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) 04:07.0 RAID bus controller: Adaptec AIC-7902 U320 w/HostRAID (rev 03) 04:07.1 RAID bus controller: Adaptec AIC-7902 U320 w/HostRAID (rev 03) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Ethernet from the net_drivers-image.img worked. SCSI from the cd_drivers-image.img didn't. Checking F3 the last messege is "moprobe: failed to load module aic79xx". Trying to load the aic79xx module manually ("insmod aic79xx") gives me a "No such device" error. -- To UNSUBSCRIBE, email to debian-boot-request@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org ----- End forwarded message ----- -- see shy jo
Attachment:
signature.asc
Description: Digital signature