[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#230374: Package: installation-reports



Package: installation-reports

INSTALL REPORT

Debian-installer-version: 'sarge' beta 2 from http://people.debian.org
uname -a: Linux lenny 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686
GNU/Linux
Date: Thu Jan 29 21:00:00 UTC 2004
Method: Boot from 100MB CD image
Machine: Generic PC Clone, Pentium IV
Processor: Pentium4 (i686)
Memory:	512M
Root Device: /dev/hda1
Root Size/partition table:

Disk /dev/hda: 2498 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from
0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/hda1   *      0+   2370    2371-  19045026   83  Linux   <-- Root
here
/dev/hda2       2371    2497     127    1020127+  82  Linux swap
/dev/hda3          0       -       0          0    0  Empty
/dev/hda4          0       -       0          0    0  Empty

Output of lspci:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio
(rev 12)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO
AGP 4x TMDS
02:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 0c)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

No problems--very straightforward installation process!  Much easier
than
with 'woody'.  Nice job!
-------------------------------------------------------------------------------------

The information contained in this message is proprietary of Amdocs,

protected from disclosure, and may be privileged.

The information is intended to be conveyed only to the designated recipient(s)

of the message. If the reader of this message is not the intended recipient,

you are hereby notified that any dissemination, use, distribution or copying of 

this communication is strictly prohibited and may be unlawful. 

If you have received this communication in error, please notify us immediately

by replying to the message and deleting it from your computer.

Thank you.

-------------------------------------------------------------------------------------

Reply to: