Bug#229217: install-report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-01-03 beta 2
uname -a: Linux ratbert 2.6.0-1-386 #2 Sun Jan 11 16:54:21 EST 2004 i686 GNU/Linux
Date: 2004-01-25
Method: installed cdrom drive to boot debian-installer
Machine: CV860A motherboard, BooksizePC
Prosessor: VIA Samuel 2 533MHz
Memory: 256M
Root Device: IDE CD-ROM (temporarily installed for boot)
Root Size/partition table:
Disk /dev/hdc: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 12 96358+ 83 Linux
/dev/hdc2 13 74 498015 82 Linux swap
/dev/hdc3 75 2432 18940635 83 Linux
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller (rev 50)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Finnish locale not set up correctly.
Surprisingly easy installation. I only had problems with getting PS/2
mouse working after installing 2.6 series kernel. After finding out
psmouse must be loaded mouse worked (I used USB mouse meanwhile).
Photographs of hardware http://www.taleman.fi/BooksizePC/ .
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: