Bug#228347: INSTALL REPORT

[Edoardo Panfili <edoardo@aspix.it>]

Package: installation-reports
Version: unknown

INSTALL REPORT

Debian-installer-version:
http://people.debian.org/cdimage/testing/netinst/powerpc/beta2/sarge-powerpc-businesscard.iso

uname -a: sorry, I have recompiled the kernel :-(
Date: 15 January 2004
Method: from cd, no proxy

Machine: Powermac
Processor: G4 1.33 Mhz
Memory: 512 Mbyte
Root Device: IDE Hitachi HTS548080M9AT00/ 76319MB
Root Size/partition table:
    sorry, I don't know how to copy it

/dev/hda
        #                    type name                  length   base      ( size )  system
/dev/hda1     Apple_partition_map Apple                     63 @ 1         ( 31.5k)  Partition map
/dev/hda2         Apple_Bootstrap bootstrap               1600 @ 64        (800.0k)  NewWorld bootblock
/dev/hda3         Apple_UNIX_SVR2 linux               61076032 @ 1664      ( 29.1G)  Linux native
/dev/hda4               Apple_HFS Apple_HFS_Untitled_3  83856512 @ 61077696  ( 40.0G)  HFS
/dev/hda5              Apple_Free                       262144 @ 144934208 (128.0M)  Free space
/dev/hda6               Apple_HFS Apple_HFS_Untitled_4  11105120 @ 145196352 (  5.3G)  HFS
/dev/hda7              Apple_Free                           16 @ 156301472 (  8.0k)  Free space

Block size=512, Number of Blocks=156301488
DeviceType=0x0, DeviceId=0x0


    part3 mounted on /
    swap on hda6


Output of lspci:

00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
00:10.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4e50
10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0035
10:12.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 02)
10:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
10:17.0 Class ff00: Apple Computer Inc.: Unknown device 003e
10:18.0 USB Controller: Apple Computer Inc.: Unknown device 003f
10:19.0 USB Controller: Apple Computer Inc.: Unknown device 003f
10:1a.0 USB Controller: Apple Computer Inc.: Unknown device 003f
10:1b.0 USB Controller: NEC Corporation USB (rev 43)
10:1b.1 USB Controller: NEC Corporation USB (rev 43)
10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
24:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0036
24:0d.0 Class ff00: Apple Computer Inc.: Unknown device 003b
24:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
24:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)


Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

I had some problem with previsiour version now I have added a DHCP
in my network and a swap partition on the powerMac.

Some little imprecision in accented Latin chars:
in "[!!] Configurare e montare le partizioni" appears
"se ,bh(E pronti"

I still have some problem for keyboard identification...
maybe that is a goot hint for me if (when I select a keyoboard layout)
I can try it (i.e. using a little input space).


Thank you for your very good job
Edoardo Panfili