[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#227854: Install report for Sparc netboot.



Package: installation-reports

INSTALL REPORT

Debian-installer-version: sparc netboot build from cvs of 2004/01/14 and
			  with hacked udpkg, kdb-chooser.
uname -a: 
Linux ultra5 2.4.21 #1 Thu Aug 7 20:30:12 EDT 2003 sparc64 GNU/Linux
Date: 2004/01/14 23h
Method:
	netboot method with rarpd/tftpd.
	dhcp network without proxy, but with a apt-proxy as mirror source.
Machine: Ultra 5
Processor: ultra-sparc II, 270
Memory: 192 Mo
Root Device: IDE
Root Size/partition table:
     (from memory)
     /dev/hda1	ext2	other_linux
     /dev/hda2	ext2	other_linux
     /dev/hda3	ext2	other_linux
     /dev/hda4	ext2	/	500 Mo
     /dev/hda5	swap	70 Mo.
Output of lspci:
00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11)
01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a)
01:03.0 IDE interface: CMD Technology Inc PCI0646 (rev 03)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [ ]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

With patched udpkg and kbd-chooser, almost everything was alright.
Since everything was included in kernel, no module was installed.

partition hard-drives didn't work, I didn't check if fdisk was installed
since my hard-drive was partitioned.

something strange, the -smp kernel was installed.

and since there is no silo-installer, I need to use my current silo with
extra parameter root=/dev/hda4

But it was a very smooth install !



Reply to: