[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#95727: marked as done ([update] ethdetect: dutch template file)



Your message dated Wed, 09 Apr 2003 04:47:09 -0400
with message-id <E193BEb-0005nT-00@auric.debian.org>
and subject line Bug#95727: fixed in ddetect 0.23
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--------------------------------------
Received: (at submit) by bugs.debian.org; 29 Apr 2001 12:50:44 +0000
>From tjzeeman@cs.vu.nl Sun Apr 29 07:50:44 2001
Return-path: <tjzeeman@cs.vu.nl>
Received: from kits.cs.vu.nl [130.37.24.12] (root)
	by master.debian.org with esmtp (Exim 3.12 1 (Debian))
	id 14tqey-0004I2-00; Sun, 29 Apr 2001 07:50:44 -0500
Received: from localhost by kits.cs.vu.nl with esmtp
	(Smail #65) id m14tqew-000ohxC; Sun, 29 Apr 2001 14:50 +0200
Date: Sun, 29 Apr 2001 14:50:41 +0200 (CEST)
From: "Thomas J. Zeeman" <tjzeeman@cs.vu.nl>
To:  <submit@bugs.debian.org>
Subject: [update] ethdetect: dutch template file
Message-ID: <Pine.GSO.4.32.0104291448500.11346-100000@kits.cs.vu.nl>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Delivered-To: submit@bugs.debian.org


Package: ethdetect
Version: 0.08

Template: ethdetect/detection_type
Type: select
Choices: passive, none
Choices-nl: passief, geen
Description: What level of hardware detection would you like?
 I can automatically detect some hardware.  If you want me to try to
detect
 your hardware you can choose between full and passive detection.  Full
 detection may involve probing which could cause the computer to hang.
 Some hardware, like ISA cards, can only be detected with full detection.
 If you don't want me to do any detection, choose 'none' and you will be
 prompted.
Description-nl: Welk niveau hardware detectie wilt u gebruiken?
 Ik kan een deel van uw hardware automatisch herkennen. Indien u wilt dat
ik uw hardware ga detecteren, kunt u kiezen uit volledige of passieve
detectie. Volledige detectie kan leiden tot het vastlopen van uw computer.
Sommige hardwre, zoals bijv. ISA kaarten, kunnen alleen met volledige
detectie herkend worden. Indien u niet wilt dat ik aan enige detectie doe,
kies dan 'geen' en u zal vragen voorgeschoteld krijgen.

Template: ethdetect/module_select
Type: select
Choices: 3c509, ne, ne2000, 3c59x, acenic, dgrs, dmfe, eepro100, epic100,
hp100, ibmtr, ne2k-pci, old_tulip, rtl8139, sis900, sktr, tlan, tulip,
other
Choices-nl: 3c509, ne, ne2000, 3c59x, acenic, dgrs, dmfe, eepro100,
epic100, hp100, ibmtr, ne2k-pci, old_tulip, rtl8139, sis900, sktr, tlan,
tulip, other
Description: What module does your ethernet card require?
 This is a list of modules that I know about.  Choose the module from the
 list that supports your card.  If your card requires a different module,
 choose 'other' and you will be prompted for the location of that module.
Description-nl: Welke module gebruikt uw ethernet kaart?
 Dit is een lijst van modules die ik ken. Kies de module uit de lijst
 die uw kaart ondersteunt. Indien uw kaart een andere module nodig
 heeft, kies dan 'other' en u zal gevraagd worden naar de locatie van
 die module.

Template: ethdetect/module_prompt
Type: string
Description: Where is the module for your ethernet card?
 Please enter the full path to the module for your ethernet card.
Description-nl: Waar is de module voor uw ethernet kaart?
 Geef het volledige pad waar de module van uw ethernet kaart staat.

Template: ethdetect/module_params
Type: string
Description: Please enter any additional parameters.
 Some modules accept load-time parameters to customize their operation.
 These parameters are often I/O port and IRQ numbers that vary from
machine
 to machine and cannot be determined from the hardware. An example string
 looks  something like "IRQ=7 IO=0x220"
Description-nl: Geef aanvullende parameters
 Sommige modules accepteren parameters bij het laden die hun werking
 kunnen aanpassen. Deze parameters zijn vaak de I/O poort en IRQ nummers
 die per machine verschillend zijn en niet door de hardware bepaald
 kunnen worden. Een voorbeeld van zo'n regel ziet er uit als "IRQ=7
 IO=0x220"

Template: ethdetect/load_module
Type: boolean
Description: Would you like me to attempt to load the '${module}' module?
 An ethernet card has been detected on the ${bus} bus.  In order for the
 operating system to use this card the module '${module}' must be loaded.
Description-nl: Wilt u dat ik probeer de '${module}' module te laden?
 Een ethernet kaart is gevonden op de ${bus} bus. Om deze kaart door het
 besturingssysteem te laten gebruiken moet de '${module}' module geladen
 worden.

Template: ethdetect/error
Type: note
Description: An error occured.
 Something went wrong.
Description-nl: Een foutje is opgetreden
 Er is iets misgegaan.

Template: ethdetect/nothing_detected
Type: note
Description: No ethernet cards were detected.
 Make sure the card is firmly seated and try again.
Description-nl: Geen ethernetkaarten gevonden.
 Controleer of de kaart goed vast zit en probeer 't nog eens.


-- 


	- Trap eens wat vaker naar je baas: neem de fiets



---------------------------------------
Received: (at 95727-close) by bugs.debian.org; 9 Apr 2003 08:53:12 +0000
>From katie@auric.debian.org Wed Apr 09 03:53:11 2003
Return-path: <katie@auric.debian.org>
Received: from auric.debian.org [206.246.226.45] (mail)
	by master.debian.org with esmtp (Exim 3.12 1 (Debian))
	id 193BKQ-0004GM-00; Wed, 09 Apr 2003 03:53:10 -0500
Received: from katie by auric.debian.org with local (Exim 3.35 1 (Debian))
	id 193BEb-0005nT-00; Wed, 09 Apr 2003 04:47:09 -0400
From: Petter Reinholdtsen <pere@debian.org>
To: 95727-close@bugs.debian.org
X-Katie: $Revision: 1.33 $
Subject: Bug#95727: fixed in ddetect 0.23
Message-Id: <E193BEb-0005nT-00@auric.debian.org>
Sender: Archive Administrator <katie@auric.debian.org>
Date: Wed, 09 Apr 2003 04:47:09 -0400
Delivered-To: 95727-close@bugs.debian.org

We believe that the bug you reported is fixed in the latest version of
ddetect, which is due to be installed in the Debian FTP archive:

ddetect_0.23.dsc
  to pool/main/d/ddetect/ddetect_0.23.dsc
ddetect_0.23.tar.gz
  to pool/main/d/ddetect/ddetect_0.23.tar.gz
ethdetect_0.23_i386.udeb
  to pool/main/d/ddetect/ethdetect_0.23_i386.udeb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 95727@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Petter Reinholdtsen <pere@debian.org> (supplier of updated ddetect package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Wed,  9 Apr 2003 10:36:50 +0200
Source: ddetect
Binary: ethdetect
Architecture: source i386
Version: 0.23
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Petter Reinholdtsen <pere@debian.org>
Description: 
 ethdetect  - Configure network hardware (udeb)
Closes: 84986 95653 95727 103216 108539 180772
Changes: 
 ddetect (0.23) unstable; urgency=low
 .
   * Petter Reinholdtsen
     - Updated nb.po received from Bjørn Steensrud.
     - Added Norwegian Nynorsk (nn.po) translations recieved from Gaute
       Hvoslef Kvalnes.
     - Acnowlege NMU: (Closes: #95653)
     - Translations for german, dutch, spanish and Brazilian portuguese
       are now included. (Closes: #84986, #95727, #103216, #108539)
     - Add myself to uploaders.
   * Tollef Fog Heen
     - Lower priority of load module question
     - Automatically ask about manual module if no card is detected.
       (Closes: #180772)
   * Thorsten Sauter
     - Run depmod before try to load modules
Files: 
 7c6b414b1d15f821d117bbfca711d7ba 865 debian-installer standard ddetect_0.23.dsc
 ad65863747c70d537ddaf8cac8bd2c27 29633 debian-installer standard ddetect_0.23.tar.gz
 13e707bc715620187a0b4cc4bdf28759 11346 debian-installer standard ethdetect_0.23_i386.udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+k9vT20zMSyow1ykRAq2jAKDMRI1VfKKsUmcFg4FviW7dQsB1fQCgw9CC
UbHLLstOhWBPMwGCoKkKWGA=
=Kigq
-----END PGP SIGNATURE-----



Reply to: