boot-floppies_3.0.18_powerpc.changes INSTALLED
Installing:
bf-arch_3.0.18_powerpc.tar.gz byhand
bf-archive-install_3.0.18_powerpc.sh byhand
bf-doc_3.0.18_powerpc.tar.gz byhand
bf-misc_3.0.18_powerpc.tar.gz byhand
install-doc_3.0.18_powerpc.deb
to pool/main/b/boot-floppies/install-doc_3.0.18_powerpc.deb
Changes: boot-floppies (3.0.18) unstable; urgency=high
.
* we are still building against unstable since there some things there
that we need and the build doesn't seem to work too well using
packages from woody
.
* this version introduces i18n for the following architectures:
arm
i386 (for the flavors compact, idepci, reiserfs and udma100-ext3,
which have kernel framebuffer support)
powerpc
.
Since we can't include all the languages we support, we had to define
a smaller list of supported languages by default:
en pt de pl fr es ja sv it hu
Folks building their own sets can change this list in the top-level
'config' file; our choices here were based on the linux users per
country data at http://counter.li.org/reports/short.php?orderby=users#table
closes: #80942
.
* updates to kernels we use:
alpha uses 2.2.20 kernel images
sparc moved to 2.2.20; sun4u moved to 2.4.16
i386 moved to 2.2.20
(powerpc still at 2.2.19 because pcmcia-modules-2.2.20-pmac not available)
mipsel moved to 2.4.16
.
* David Kimdon
- report failure if dhclient cannot configure the interface,
closes: #109455
- more Danish documentation and messages thanks to
Claus Hindsgaul <claus_h@image.dk>
- lots and lots of Danish translations thanks to Morten Bo Johansen
and Claus Hindsgaul <claus_h@image.dk>
- fr.po update thanks to Martin Quinson <Martin.Quinson@ens-lyon.fr>
- remember gateway on the second pass through network configuration
- fix badly broken language chooser, closes: #120637
- on i18n builds put libnewt-utf8-0 on rootdisk in place of libnewt0
- fix i386 build rules so the modules on the rootdisk match the kernel
- i18n some strings that missed out
* Claus Hindsgaul
- fixups for MSG-NO and MSG-YES, new entities for defaults.ent, remove
orphaned dbootstrap.sgml form doc-check
- replace "ø" (unsupported in CP437) in Danish boot messages with
Swedish "ö", and remove da from the latin1 list in conf, since
it did not seem to work anyway
- Small spelling errors in english boot-new.sgml
- Danish documentation updates, thanks to Morten Bo Johansen
- updated Italian dbootstrap translation by Eugenia Franzoni
- modify 'make lint-docs' to verify all architectures
modify 'make lint-all-lang-docs' to verify all architectures
remove 'make lint-all-arch-all-lang-docs' (use lint-all-lang-docs)
- Update URLs to kernel-traffic and "Definition of Open Source"
- Initial Danish release-notes translation
- Update kernel versions in docs to match config
* Stefan Gybas
- use $ldlib in mklibs.py
- s390: use mklibs.py instead of mklibs.sh for library reduction
- include lsmod on initrd
- include ASCtoEBC and EBCtoASC in partbl_ibm.c, they are no longer in
<asm/vtoc.h>
- fixed detection of point-to-point interfaces
- s390: rewrote netsetup to be more modular, each network module can
now provide a module specific script in /usr/share/netsetup/ for
the chandev/module parameter configuration
- s390: install netsetup.sh as sbin/netsetup
- s390: don't modify etc/passwd on the initrd any longer
- s390: reduce initrd size as modules from a second initrd are now
symlinked instead of copied.
- s390: Always offer to format a newly attached DASD to avoid problems
if a previously used VM minidisk was resized
- s390: Make /sbin/fdisk a symlink to fdasd
- s390: Don't ask for bad block scan when formatting a DASD
- use $MIRRORS instead of $s390_url to download the s390 udeb kernel
- s390: Copy /root/.profile from s390-specials instead of changing
the one from base-files
- s390: use mini-inetd from the tcputils package instead of netkit-inetd
- s390: Use grep, ping and hostname from busybox >=1:0.60.2-2. This
version fixed a bug in grep's return code for binary files
- s390: Use ifconfig instead of ifup in netsetup.sh
- various other minor s390 fixes
* Adam Di Carlo
- fix a number of other i18n build issues
- 'make clean' and 'make distclean' act more consistently
- powerpc build was broken in last version, removing yaboot.conf which
is now in CVS and not downloaded at build time
- fix some root*.bin build dependancy problems
- i386 reiserfs and udma100-ext3 flavors were not being built with
revext set properly, thus they were not getting the proper pcmcia
modules and such, closing part of #118999
- i386 release.sh: split images-2.88 as its own tarball,
bf-common*.tar.gz was getting too large
- bogl-related stuff must be 0.1.8-1 or better
- in i136/i18n build, don't allow reduction libnewt*-pic, since i386
uses a mixed i18n and non-i18n build
- require newt 0.50.17-9 or better both for building and root.bin
- dbootstrap: when you mount an existing root partition with
/lib/modules on it, we adjust the rootdisk /lib/modules to it and
run depmod -a; this helps when you're restarting an aborted
installation
- dbootstrap: suppress message to testers if we're 'quiet'
- dbootstrap: clear the screen properly in i18n and non-i18n
closes: #124143
- normal doc build uses docs.stamp to prevent it from getting rebuilt
all the time in incremental builds
- dbootstrap: improved info messages when it first starts
- require debiandoc-sgml 1.1.53 or better, has locale for Catalan
- require newest busybox, closes: #124107
* Ethan Benson
- recent portability patch to mklibs.py requires python 2 so
Build-depend on python-dev (>= 2.1.1-4), python2.1-xml
- fix utilities/dbootstrap/langs/Makefile: PYTHON_VERSION=2.1
- mklibs.py now seems to work on powerpc, use it now
* Christian T. Steigies
- do not ship outdated m68k quickinstall docs
- m68k uses 2.2.20 kernel-images
* Carlos Barros: Spanish updates
* David Martinez: Spanish updates
* Andre Luis Lopes: Portuguese updates
* Gerhard Tonn
- s390 changes: make netsetup.sh more quiet and save gateway information
from initial netsetup
* Phil Blundell
- fall back to single language mode if fbcon isn't available at runtime
- fix naming of sparc driver disks in dbootstrap, closes: #118557
- enable language chooser for ARM
- try to fix unloading of pcmcia modules, closes: #120480
- warn the user if trying to install on a machine with too little RAM
- revert to using zip for ARM build of riscpcs install kit
- enable kmod while modconf is running, closes: #78750
- correct path to root.bin in udma100-ext3 install.bat, closes: #122869
- added i386-specials/mini-iso.sh for bootable CD creation;
this is just for your enjoyment, not officially provided or
supported by anyone
- try harder to suppress modconf i18n in UTF-8 environment,
closes: #121186
- stop LC offering languages that have no catalog
- improve layout of net-fetch dialog box when i18n in use,
closes: #123388
- print a register dump if dbootstrap segfaults in debug mode
* Chris Tillman
- add notes for single-language builders, powerpc-specials always en
- reorganize floppy booting section, add boot-floppy-hfs,
closes: #121065
- add keyboard choice and append= line (tks Branden),
closes: #122407
- add Sun workstation clues, closes: #72479
- increase memory needed for powerpc to 16M
- add doc entities for kernel-version & default-2.2
- add note about possibly too much memory
- cleanup release notes and put in chronological order
- add note for broken OldWorld G3's - System Disk utility
- add BootX instructions for booting the installer,
closes: #123571, #123623
* Stephen Marenka
- i386 and powerpc specifics for replacing kernel on rescue floppy
* Pawel Tecza: updated Polish translation of dselect-beginner
* Jordi Mallach
- Catalan translation of dbootstrap and bootdisk help screens.
- updates to rescue disk messages.
- Catalan translation of Install Manual (Antoni Bella, Ingrid Peiró and
others).
* Guido Günther
- mips documentation updates
- add mips-specials/.cvsignore
- set notInstalledLILO=0 after running dvhtool
- don't call make_boot_floppy on mips(el)
* Eduard Bloch:
- set a sticky reference to /boot/boot-menu.b, since newer lilo packages
create the symlink in the postinst and this may fail,
closes: #122184
- minor de.po updates
- corrected the memory size in the no-swap warning message,
closes: #123167
* Mark van Walraven:
- dbootstrap: when mounting on /var/tmp, use special perms, just like
we do on /tmp
- dbootstrap create user settings files on target root during kernel
install step, instead of when target root is first mounted
* Richard Hirst:
- hppa now uses libc 2.2.4
- ia64: grab elilo.efi from a deb, not the build system
- ia64: add "cdrom" to bootargs
* Junichi Uekawa:
- Japanese translation updates for ja.po
- change utilities/dbootstrap/langs/japanese.src to a decent content.
* Matt Kraai:
- don't ask about 2.0 filesystem compatibility on mips,
closes: #122940
- don't talk about virtual consoles if using a serial console,
closes: #122719
- don't let ioctl.save mess up serial console settings,
closes: #122720
* Andre Luis Lopes <andrelop@ig.com.br>: Brazilian updates
* John H. Robinson, IV:
- proper extract/base list selection for i386 flavors
- udbootstrap now checks if console is serial or not, closes: #123661
- added quiet flag for mkreiserfs, so it does not use so much tty
output. significant speed increase.
* Colin Walters:
- Increase size of kver buffer.
- Describe netbooting better, and fix some bugs and typos in documentation.
* Karsten Merker: mipsel updates
- kernel.sh: fix kernel image name due to change in kernel-package 7.75
- dbootstrap: extended subarch detection for DECstations
- documentation updates
Thank you for your contribution to Debian.
Reply to: