[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Boot Problem

I´m Ricardo Gastón Salomone, and yesterday I tried to install Debian 2.1 in my computer but I couldn´t!!!!.
Following this, It is the detail of the boot part. After the message "DC390: 0 adapters Found" the systems hangs. The computer stops there. It didn´t tell me what´s the problem.
First I thought That It could be my modem, or the sound card, the scsi card, my two network adapters, but I take all of them out of the pc and it still happens. The system hangs in the same point.
What it could be???
My computer has a Gigabyte 71xe motherboard, with an Athlon 600 Mhz and 192Mbytes of memory.
Please help me !!!!
Ricardo Gastón Salomone.

Probing PCI hardware
Calibrating delay loop... Ok - 604.57 BogoMIPS
Memory: 62888k/66556 available (1144k kernel code , 384k reserved,1448k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domainsovkets 0.13 for Linux NET.034
IP Prototcols: ICMP, IGMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Cheking 'hlt' instruction... Ok.
Linux version 2.0.38 (root@lollypop) (gcc version thu Dec 9 04:30:31 PST 1999
Starting kswapd v
Real Time Clock Driver v 1.09
Ramdisk driver initialized: 16 ramdisks of 4096k size
Loop: registered device at major 7.
Hda: SAMSUNG SV1296A, 12323MB w/482KB Cache, CHS=1571/255/63
Ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
Ide1 at 0x170-0x177,0x376 on irq15
Floppy drive(s): fd0is 1.44M
FDC 0 is a post-1991 82077
Md driver 0.36.3MAX_MD_DEV=4, MAX_REAL=8
Sym53c416.c: version 1.0.0
DC390: 0 adapters found

Reply to: