Bug#65013: boot-floppies
Package: boot-floppies
Version: 2.1r4
architecture: i386
model: Celer-on
memory: 64
scsi: no
cd-rom: Fedelia FCD-402
hd-drive: Maxtor 7345AT - size : 345MB
network card: Tulip chipset
Sorry, i sent this further info to submit@bugs.debian.org before knowing
there was a special address created for this.
I could make a copy of the boot messages (dmesg), they
can be useful, they report error about hda ... I attached the text file.
> Thank you.
>
> Eric
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fadf0
pcibios_init : BIOS32 Service Directory entry at 0xfb270
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb2a0
Probing PCI hardware.
Calibrating delay loop.. ok - 522.65 BogoMIPS
Memory: 61820k/65472k available (1144k kernel code, 384k reserved, 1432k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.38 (root@lollypop) (gcc version 2.7.2.3) #2 Thu Dec 9 04:30:31 PST 1999
Starting kswapd v 1.4.2.2
Real Time Clock Driver v1.09
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: VIA VT82C586B (split FIFO) UDMA Bus Mastering IDE
Controller on PCI bus 0 function 57
ide: timings == 3a09020b
ide0: BM-DMA at 0xe000-0xe007
ide1: BM-DMA at 0xe008-0xe00f
hda: Maxtor 7345 AT, 329MB w/64kB Cache, CHS=790/15/57
hdb: 40X CD-ROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
sym53c416.c: Version 1.0.0
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
aec671x_detect:
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda:hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
ide0: reset: success
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
ide0: reset: success
Dev 03:00 Sun disklabel: bad magic 0000
unknown partition table
RAMDISK: Compressed image found at block 0
VFS: Mounted root (minix filesystem).
VFS: Disk change detected on device 02:00
Unable to load NLS charset cp437(nls_cp437)
Reply to: