Re: Backport request: smartmontools (squeeze)
Jeremy Allard schrieb am Saturday, den 15. October 2011:
> 2011/10/13 Yann Droneaud <yann@droneaud.fr>
>
> > Hi,
> >
> > Is it possible that someone provide a backport of smartmontools for
> > squeeze.
> >
> > Current squeeze smartmontools doesn't recognize OCZ Vertex 3 parameters
> > and provides meaningless values.
> >
> > For exemple:
> >
> > --- smartctl-squeeze.log 2011-10-13 12:45:36.918050934 +0200
> > +++ smartctl-svn.log 2011-10-13 12:45:36.996048835 +0200
> > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> > UPDATED WHEN_FAILED RAW_VALUE
> > - 1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail
> > Always - 14731182168666
> > - 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail
> > Always - 0
> > - 9 Power_On_Hours 0x0032 --- --- --- Old_age
> > Always - 5113837376897967204
> > - 12 Power_Cycle_Count 0x0032 --- --- --- Old_age
> > Always - 549988
> > + 1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail
> > Always - 0/224776261
> > + 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail
> > Always - 0
> > + 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age
> > Always - 286h+18m+43.840s
> > + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> > Always - 8
> >
> > Regards.
> >
> > --
> > Yann Droneaud
> >
> >
> Hello, I could backport the version from sid. But the only problem is that
> I'm not an official debian dev so i can't upload directly to the mirror.
> With my past experiences, i can tell that asking for a package to be
> reviewed and eventually uploaded, it's a very long process.
sid is nearly always wrong.
Alex
Reply to: