Backport request: smartmontools (squeeze)
Hi,
Is it possible that someone provide a backport of smartmontools for
squeeze.
Current squeeze smartmontools doesn't recognize OCZ Vertex 3 parameters
and provides meaningless values.
For exemple:
--- smartctl-squeeze.log 2011-10-13 12:45:36.918050934 +0200
+++ smartctl-svn.log 2011-10-13 12:45:36.996048835 +0200
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail
Always - 14731182168666
- 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail
Always - 0
- 9 Power_On_Hours 0x0032 --- --- --- Old_age
Always - 5113837376897967204
- 12 Power_Cycle_Count 0x0032 --- --- --- Old_age
Always - 549988
+ 1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail
Always - 0/224776261
+ 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail
Always - 0
+ 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age
Always - 286h+18m+43.840s
+ 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 8
Regards.
--
Yann Droneaud
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: OCZ Vertex SSD
Device Model: OCZ-VERTEX3
Serial Number: OCZ-xxxxxxxxxxxxxxx
Firmware Version: 2.11
User Capacity: 120,034,123,776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Not recognized. Minor revision code: 0x0110
Local Time is: Thu Oct 13 xx:xx:xx 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail Always - 14731182168666
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 --- --- --- Old_age Always - 5113837376897967204
12 Power_Cycle_Count 0x0032 --- --- --- Old_age Always - 549988
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 2
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 1
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Lifetime Min/Max 127/129)
195 Program_Failure_Blk_Ct 0x001c --- --- --- Old_age Offline - 14731182176376
196 Erase_Failure_Blk_Ct 0x0033 --- --- --- Pre-fail Always - 25700
201 Write_Commands_Tot_Ct 0x001c --- --- --- Old_age Offline - 14731182176376
204 Bad_Block_Full_Flag 0x001c --- --- --- Old_age Offline - 14731182176376
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 59596966199396
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 2775
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 7443
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 7443
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 700
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.42 2011-10-12 r3445 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: OCZ-VERTEX3
Serial Number: OCZ-xxxxxxxxxxxxxxx
LU WWN Device Id: xxxxxxxxxxxxxxxxxx
Firmware Version: 2.11
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Oct 13 xx:xx:xx 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 0/224776261
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 286h+18m+43.840s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 2
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (0 127 0 129 0)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/224776261
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/224776261
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/224776261
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 59592671232100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 2775
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7443
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7443
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 700
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: