Accepted debhelper 12.7.3~bpo10+1 (source) into buster-backports
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Tue, 14 Jan 2020 20:46:34 +0000
Source: debhelper
Architecture: source
Version: 12.7.3~bpo10+1
Distribution: buster-backports
Urgency: medium
Maintainer: Debhelper Maintainers <debhelper@packages.debian.org>
Changed-By: Niels Thykier <niels@thykier.net>
Closes: 933576 933799 941245 942111 942454 942690 943376 943705 943853 944225 945149 946655 947506
Changes:
debhelper (12.7.3~bpo10+1) buster-backports; urgency=medium
.
* Rebuild for buster-backports.
.
debhelper (12.7.3) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_perl: Use perl:any for perl module in addition to perl
programs. Thanks to Helmut Grohne and Niko Tyni for the
suggestion and analysis. (Closes: #946655)
* dh_gencontrol: Clear the "Built-Using" flag for dbgsym
packages. It is irrelevant as the original binary will
have the field plus the field can cause lintian warnings.
(Closes: #947506)
* lintian-overrides: Override no-dh-sequencer as it is a
false-positive that lintian cannot be expected to know.
.
[ Debian Janitor ]
* Fix day-of-week for changelog entry 4.0.0.
.
debhelper (12.7.2) unstable; urgency=medium
.
[ Niels Thykier ]
* dh: Skip conditional dh sequence addons in the clean target.
This avoids FTBFS with conditional addons where the
build-dependency is not satisfied. (Closes: #944225)
* meson.pm: Fix bug where dh_auto_test would break horribly
under compat 13 due to an uninitialized variable. Thanks to
Benjamin Jacobs for reporting the issue. (Closes: #945149)
* dh_installman: Fix non-deterministic behaviour when there
multiple definitions of the same manpage in a package.
In compat 13, this is resolved by aborting with an error.
In older compat levels, dh_installman will deterministically
pick a canonical version (via sort) along with emitting a
warning. Thanks to Colin Watson for reporting the issue.
(Closes: #943705)
* dh_auto_*: In compat 13+, reset HOME and XDG_* environment
variables. Some are cleared and some are set to a writable
directory that persist until dh_clean. Thanks to
Simon McVittie for reporting the issue.
(Closes: #942111)
* dh_auto_*: As a side-effect of the above, debhelper in compat
13+ no longer trips a FTBFS in sbuild for meson packages when
ccache is installed but not configured/used explicitly.
Thanks to Simon McVittie for reporting the issue.
(Closes: #933799)
* d/control: Bump Standards-Versions to 4.4.1 - no changes
required.
.
[ Andrius Merkys ]
* debhelper.pod: Document changes to the gradle third-party
build system in compat 13.
.
[ Translations ]
* Update German translation (Chris Leick) (Closes: #943853)
.
debhelper (12.7.1) unstable; urgency=medium
.
[ Colin Watson ]
* dh_installman: Correctly handle compressed manpages when
dh_installman uses man-recode. (Closes: #943376)
.
debhelper (12.7) unstable; urgency=medium
.
[ Niels Thykier ]:
* dh_installman: Avoid error message when man-db is not installed
(only occurs in debhelper's own build as man-db is a mandatory
dependency).
* dh_installman: Use man-recode(1) when available to massively
speed up re-encoding performance for any package with a non-
trivial amount of manpages. Thanks to Robert Luberda for
reporting the issue and Colin Watson for writing man-recode
(Closes: #933576)
* debhelper.pod: Actively discourage compat 11 as it has an
issue that causes services not to start correctly in all cases
(e.g. install, remove-but-not-purge, install again), which
cannot be fixed.
* dh_auto_*: Support a new --reload-all-buildenv-variables
option for resetting the cache (of e.g. dpkg-buildflags).
This is needed by e.g. parted which does two builds with
different CFLAGS.
* dh_makeshlibs: Suggest/Document that --no-add-udeb can be
relevant for some udebs where the shared library for the udeb
is embedded in a different package (e.g. the main udeb
package). Thanks to Nicolas Braud-Santoni for reporting the
issue. (Closes: #942454)
* meson.pm: Fix invalid call under compat 13. Thanks to
Jeremy Bicha for testing it. (Closes: #942690)
.
[ Helmut Grohne ]:
* cmake buildsystem: Fix CMAKE_SYSTEM_PROCESSOR for 32bit arms.
(Closes: #941245)
.
[ Niko Tyni ]
* Basic support cross building XS modules:
+ perl_makemaker: run Makefile.PL with host arch Config.pm
+ perl_build: run Build.PL and Build with host arch Config.pm
+ dh_perl: scan host arch include directories for Perl plugins
Checksums-Sha1:
01b7b7d5244958e0b47cf5e0a511214a81515722 1875 debhelper_12.7.3~bpo10+1.dsc
d1a20f722e1133a8b3f3db8efc25e52bb69ab483 511228 debhelper_12.7.3~bpo10+1.tar.xz
8b382f914abaf0cfd7a1d8ccd5085f3c614a88bf 4579 debhelper_12.7.3~bpo10+1_source.buildinfo
Checksums-Sha256:
ae969e16d95ab8a7e662712b691fb7235c165726976725fc26fd390da84f255c 1875 debhelper_12.7.3~bpo10+1.dsc
d684c7188e59e7f18e3d956ed5c612cd4585444572d4e6723b024b1f866c0aab 511228 debhelper_12.7.3~bpo10+1.tar.xz
f9ea317c7fd7bc2d49cb017d373c989c75f72bc9448187a4846b1278aaaa0915 4579 debhelper_12.7.3~bpo10+1_source.buildinfo
Files:
750c4f528e98744819fa260b883d4074 1875 devel optional debhelper_12.7.3~bpo10+1.dsc
3347934fef51da2197f89722454b2c2b 511228 devel optional debhelper_12.7.3~bpo10+1.tar.xz
c9c0292a0d2cb86c99e94cbe9f038daf 4579 devel optional debhelper_12.7.3~bpo10+1_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=caZ1
-----END PGP SIGNATURE-----
Reply to: