[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accepted debhelper 10.9.2~bpo9+1 (source) into stretch-backports

Hash: SHA256

Format: 1.8
Date: Thu, 19 Oct 2017 05:25:11 +0000
Source: debhelper
Binary: debhelper dh-systemd
Architecture: source
Version: 10.9.2~bpo9+1
Distribution: stretch-backports
Urgency: medium
Maintainer: Debhelper Maintainers <debhelper-devel@lists.alioth.debian.org>
Changed-By: Niels Thykier <niels@thykier.net>
 debhelper  - helper programs for debian/rules
 dh-systemd - debhelper add-on to handle systemd unit files - transitional pack
Closes: 35733 626685 752521 764730 795432 840913 841746 857306 870201 870768 872745 875586 876486 876689 877357 877989 878325 878427 878460
 debhelper (10.9.2~bpo9+1) stretch-backports; urgency=medium
   * Rebuild for stretch-backports.
 debhelper (10.9.2) unstable; urgency=medium
   [ Niels Thykier ]
   * dh_install: Defer the removal of --list-missing and
     --fail-missing until compat 12.
   * dh: Run the new dh_installsystemd helper by default in compat 11.
   * systemd.pm: Remove the sequence in compat 11.  It has been replaced
     by the new dh_installsystemd helper.
   [ Lisandro Damián Nicanor Pérez Meyer ]
   * qmake.pm: Remove unnecessary "-nocache" parameter.
     (Closes: #878427, LP: #1206234)
   [ Ville Skyttä ]
   * Fix a number of spelling mistakes.  (Closes: #878325)
   [ Felipe Sateler ]
   * dh_installsystemd: New command (currently noop except when used in
     the experimental compat 11).  This new helper:
     - Generates postinst code for tmpfiles (now that dh_installinit
       does not).
     - Follows the naming convention for other built-in dh_* commands.
     - Replaces dh_systemd_enable and dh_systemd_start in compat 11
       and later.
     - Only acts on units with the name specified by "--name" when this
       option is given.
     (Closes: #752521, #857306, #870768, #876486)
   * dh_systemd_enable: Remove as obsolete in compat 11.
   * dh_systemd_start: Ditto.
   [ Helmut Grohne ]
   * cmake.pm: Also supply PKGCONFIG_EXECUTABLE for obsolete
     UsePkgConfig.cmake.  (Closes: #878460)
 debhelper (10.9.1) unstable; urgency=medium
   [ Niels Thykier ]
   * dh_builddeb: Add some missing error checks.
   * Dh_Lib.pm: Fix bug where debhelper could discard some error
     messages during parsing when -O options were passed via
     DH_OPTIONS (among other).  Thanks to Adrian Bunk and
     Andrew Shadura for reporting the issue.  (Closes: #876689)
   * Dh_Getopt.pm: Gracefully reduce the tool to a no-op when given
     a -p<pkg> and <pkg> is disabled by a Build-Profile.
   * debhelper.7: Document how package selections interact with
     Build-Profiles.  Thanks to Helmut Grohne for the report.
     (Closes: #872745)
   * dh_installdocs: Validate that the package passed to
     --doc-main-package are listed in debian/control.
   * dh_installexamples: Ditto.
   * dh_systemd_start: Regex escape two paths used in a regex.
   * Dh_Lib: Open compat 12.
   * dh_clean: Defer making -k an error until compat 12.
   * Dh_Getopt: Defer making -s an error until compat 12.
   * dh_installinit: Defer making --no-restart-on-upgrade an error
     until compat 12.
   * Dh_Lib: Defer making the "shell-spawning bug" in doit an error
     until compat 12.
   * dh_systemd_enable: Fix regression in debhelper/10.9 where
     template units would be installed as regular units (and
     possibly replace regular units).  (Closes: #877989)
   * dh_systemd_enable: Drop versioned dependency on
     init-system-helpers that is satisfied in oldstable.
   * Dh_Lib: Fix regression where --no-act would actually create
     maintscript snippets.
   * dh_systemd_*: If an unit file cannot be read (e.g. to check for
     the [Install] section), error out instead of emitting a warning
     and continuing.
   * t: Add tests for dh_systemd_* based on WIP tests from Felipe
     Sateler related to a new dh_installsystemd helper.
   * dh_systemd_enable: Properly quote unit names to preserve
     escaped names like "\x2d".  Thanks to Bernd Zeimetz for
     reporting the issue.  (Closes: #764730)
   * dh_systemd_start: Ditto.
   * meson.pm: Add prototype support for cross building by relying
     on /usr/share/meson/debcrossgen.  Note that this is currently
     not functional due to #875703.
   * debian/control: Bump Standards-Versions to 4.1.1 - No changes
   [ Dmitry Shachnev ]
   * qmake.pm: Add basic cross-building support.  (Closes: #877357)
 debhelper (10.9) unstable; urgency=medium
   [ Niels Thykier ]
   * debhelper.pod: Fix typo.
   * dh_fixperms: Reset permissions of .scss and .sass files to
     0644.  Thanks to Jonas Smedegaard for the suggestion.
     (Closes: #875586)
   * dh_shlibdeps: Disable unused file(1) tests.
   * dh_strip: In compat 11, rely on file headers/magic to
     determine whether files are ELF binaries worth processing
     instead of using filenames/extensions.  (Closes: #35733)
   * dh_shlibdeps: Ditto.
   * d/control: Bump Standards-Versions to 4.1.0:
     - Bump priority of dh-systemd to "optional".
   * dh_makeshlibs: Avoid gratious warning about a non-existing
     directory, when the packaging directory does not exist.
     (Closes: #626685)
   * dh_gencontrol: Ensure that dbgsym packages do not inherit the
     "Important" field.
   * dh_installinfo: Merge two chmod calls into one to save a
   * dh_builddeb: Use -z6 compression for udebs (up from -z1).
     Thanks to Adrian Bunk for the suggestion and Aurelien Jarno
     for confirming it would be fine for d-i.  (Closes: #870201)
   * dh_fixperms: Set the permissions of /usr/lib/nodejs/*/{cli,bin}.js
     to 0755.  Thanks to Pirate Praveen for the report.
     (Closes: #840913)
   * Dh_lib.pm: Expand *_doit and doit to also support a chdir in the
     child process.
   * Dh_Getopt.pm: Validate package names passed via -p and -N to ensure
     they are present in d/control.  Thanks to Matthias Klose for the
     report.  (Closes: #795432)
   * debhelper.7: Fix typo of compatibility.
   [ Felipe Sateler ]
   * dh_systemd_enable: Refactor and add support for timer units.
     (Closes: #841746)
 1b3323a33d45967e613bf2745b87970ef6e46174 1796 debhelper_10.9.2~bpo9+1.dsc
 222b6f569c58e7a3c31094bb557d4c08cc5e7eb5 424940 debhelper_10.9.2~bpo9+1.tar.xz
 dc664400a6108aaf17d4dfb6976c4f856d61e96a 4763 debhelper_10.9.2~bpo9+1_source.buildinfo
 71e238baa69755b27dadaed680d9518a21969034df3093559312ce7cc07854bc 1796 debhelper_10.9.2~bpo9+1.dsc
 2af8bed14e320ab6139ad119e95c0d3fdf810353c2ed587a8ff2f9eb9e0b6e7e 424940 debhelper_10.9.2~bpo9+1.tar.xz
 57254f6cb5e5ba02fb36676366c4d1cd290bf9d54c81c7ab5783faeb7b41eb81 4763 debhelper_10.9.2~bpo9+1_source.buildinfo
 da95edd02948c104af87d52ca8d36101 1796 devel optional debhelper_10.9.2~bpo9+1.dsc
 3bb9df408a8933c7b1f3e6f584f56eda 424940 devel optional debhelper_10.9.2~bpo9+1.tar.xz
 b250556d74b6bbd0d07ebf1d2be34903 4763 devel optional debhelper_10.9.2~bpo9+1_source.buildinfo



Reply to: