[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

lm-sensors_3.3.2-2~bpo60+1_amd64.changes is NEW



(new) fancontrol_3.3.2-2~bpo60+1_all.deb extra utils
utilities to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a daemon that calculates fan speeds from temperatures
 and sets the corresponding PWM outputs to the computed values.
(new) libsensors4-dev_3.3.2-2~bpo60+1_amd64.deb extra libdevel
lm-sensors development kit
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains the static library and header files used in
 development.
(new) libsensors4_3.3.2-2~bpo60+1_amd64.deb optional libs
library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a shared library for querying lm-sensors.
(new) lm-sensors_3.3.2-2~bpo60+1.debian.tar.xz extra utils
(new) lm-sensors_3.3.2-2~bpo60+1.dsc extra utils
(new) lm-sensors_3.3.2-2~bpo60+1_amd64.deb extra utils
utilities to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains programs to help you set up and read data from
 lm-sensors.
(new) lm-sensors_3.3.2.orig.tar.bz2 extra utils
(new) sensord_3.3.2-2~bpo60+1_amd64.deb extra utils
hardware sensor information logging daemon
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a daemon that logs hardware health status to the
 system log with optional warnings on potential system problems.


Changes:
lm-sensors (1:3.3.2-2~bpo60+1) squeeze-backports; urgency=low
 .
  * Rebuild for squeeze-backports.
  * Disable multiarch by changing LIBDIR, removing Multi-Arch from
      debian/control, and editing debian/libsensors4*.install.
  * Build requires backported debhelper.
 .
lm-sensors (1:3.3.2-2) unstable; urgency=low
 .
  * Tell user to restart kmod instead of modules-init-tools (closes:
    #670213).
  * Install a systemd service file for lm-sensors (closes: #674778).
  * Correctly pass CPPFLAGS and LDFLAGS to build with hardening support.
 .
lm-sensors (1:3.3.2-1) unstable; urgency=low
 .
  * New upstream version:
  * Bumped Standards-version to 3.9.3 (no changes).
  * Drop useless dependency on makedev | udev (closes: #666510).
 .
lm-sensors (1:3.3.1-2) unstable; urgency=low
 .
  * sensors-detect: restrict super-io probes to x86 and x86_64 (closes:
    #657555).
 .
lm-sensors (1:3.3.1-1) unstable; urgency=low
 .
  * New upstream version:
    - Drop 12-upstream-patches.patch.
    - Drop 13-udev-run.patch.
 .
lm-sensors (1:3.3.0-4) unstable; urgency=low
 .
  * Rename source package to lm-sensors now that the version 2 is gone.
  * Add patch from upstream to support 2 digits kernel version (closes:
    #630508).
  * Convert to multiarch:
    - Bump debhelper build-dep to >= 8.1.3 for multiarch.
    - Add Pre-Depends: ${misc:Pre-Depends} to libsensors4 and set it
    Multi-Arch: same.
    - Install the library in the multiarch path.
  * Add build-arch and build-indep targets.
 .
lm-sensors-3 (1:3.3.0-3) unstable; urgency=low
 .
  * Correctly detect udev in sensors-detect (closes: #628228).
 .
lm-sensors-3 (1:3.3.0-2) unstable; urgency=low
 .
  * Avoid printing a warning if ucf is not available (closes: #626402).
 .
lm-sensors-3 (1:3.3.0-1) unstable; urgency=low
 .
  * New upstream version:
    - refresh all patches.
    - update 12-upstream-patches.patch with upstream recommended patches.
    - update symbols file, now that upstream only export symbols of the
      public API. Hope it won't break anything, otherwise we should go
      through a soname bump and a transition.
  * Remove old fancontrol links in postinst (closes: bug#612231).
  * Bumped Standards-version to 3.9.2 (no changes).
 .
lm-sensors-3 (1:3.2.0-1) unstable; urgency=low
 .
  * New upstream version.
  * Suggests fancontrol instead of recommending it in lm-sensors (closes:
    bug#567185).
  * Suggests lm-sensors instead of recommending it in libsensors4 (closes:
    bug#602914).
  * Suggests rrdtool in sensord (closes: bug#588132).
  * Detect SMSC SCH5524-NS chip (closes: bug#588355).
  * Bumped Standards-version to 3.9.1 (no changes).


Override entries for your package:

Announcing to debian-backports-changes@lists.debian.org


Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.


Reply to: